Navigation Membrane Codes What's New at Mule-Hide Product Information Warranty Information Warranty Eligible Contractor Login Disclaimer Sales Reps - Contact Information, Location and Territory Map Product Installation & Sales Videos National Support Product Specifications Mule-Hide Distribution About UsContact UsProducts & SystemsLinksHomeHome
DryDec™ Walkable PVC
Estimating Tips

DryDec™ Walkable PVC Membrane Accessories Coverage Rates: 		DryDec™ Product Specifications
Back to DryDec™ Product Information
DryDec™ Product Sheets
 
DryDec™ Water Base Latex Adhesive (beige), 2.5 gal. 125-175 sq. ft. per gal.
DryDec™ Solvent Base Adhesive (clear), 5 gal. 50-60 sq. ft. per gal.
DecPatch powder in a 5 gal. pail (add water) 1 pail per roll
Deck Drain NDR 4-1 Universal Drain 1 per drain
DecClad PVC Drip 2" x 1-1/2" x 1/2" x 1/2" x 8' 200 linear ft. per tube
DecClad PVC Kickout 3" x 1/2" x 1/2" x 8' 160 linear ft. per tube
DecCorner (for inside corners under membrane) 1 per corner
DecFlash 4" (for 4" wood posts & columns only) 2 per post
DecFlash 6" (for all flashings except 4" post requiring boot) Varies with application
DryDec™ Termination Bar (10' long pieces) 250 linear ft. per tube
 
 

Adhesives – Types & Uses

  1. DryDec™ Water Base Latex Adhesive (beige) to fully adhere DryDec™ Walkable PVC to plywood surfaces only (must be a clean porous surface, not for use in temperatures under 50 degrees F). Single-side application by trowel on the plywood substrate only. Requires 4 to 6 hours to set. Not for use on vertical surfaces.
  2. DryDec™ Solvent Base Adhesive (clear) to adhere DryDec™ Walkable PVC to concrete or other non-porous - horizontal or vertical surfaces (not for use in temperatures lower than 34 degrees F). 2-sided application by trowel or medium nap roller to both surfaces – back of membrane sheet & substrate. Also works well on clean metal flashings.