Skip to content
2" TL Membrane Plate

2" TL Membrane Plate

The 2” TL Seam Plate is used to attach reinforced single-ply and modified bituminous membranes to cementitious wood fiber, gypsum and lightweight concrete substrates. Use with Mule-Hide TL Roofing Fastener.

System

EPDM
TPO
PVC
ModBit
  • Used with TL fasteners for membrane attachment only
  • Barbed to increase grip strength with membrane
  • Meets UL Standards
  • Meets FM Standards
  • Meets Miami-Dade-County Standards
  • Meets ICC-ES Standards

Documents

PDS TL Metal Plates
View
SDS - Statement for Article Products
View

Single-Ply Roofing Accessories Guide
View

Details

BASE ATTACHMENT - FLEECE BACK
BASE ATTACHMENT USING 6 inch STANDARD TPO-C MEMBRANE
BASE ATTACHMENT USING 9 inch INVERTED FLEECE BACK
BASE ATTACHMENT WITH 6 inch RUSS
BASE ATTACHMENT WITH PLATES AND FASTENERS
DOOR THRESHOLD FLASHING
PARAPET FLASHING FOR PVC

FIELD FABRICATED INSIDE CORNER FOR PVC
FIELD FABRICATED OUTSIDE CORNER FOR PVC
PRE-MOLDED INSIDE CORNER FLASHING FOR PVC
PRE-MOLDED OUTSIDE CORNER FOR PVC

CURB FLASHING FOR PVC
CURB FLASHING FOR TPO
CURB/WALL FLASHING WITH M-H ALL-PURPOSE BAR - FLEECE BACK & SELF-ADHERING TPO
CURB/WALL FLASHING WITH M-H ALL-PURPOSE BAR FOR TPO
DRAIN FLASHING WITH TARGET - FLEECE BACK
DRAIN FLASHING WITH TARGET - FLEECE BACK AND SELF-ADHERING TPO
INSULATED PARAPET WALL WITH METAL COPING CAP FOR TPO
SLEEPER FOR EPDM

DRAIN FLASHING WITH TARGET PATCH FOR TPO
MECHANICALLY FASTENED TARGET ROOF DRAIN FOR PVC
RETROFIT DRAIN INSERT - COMPRESSION TYPE INSERT FOR TPO

DECK TO WALL JOINT - A - RMS STRIP - ADHESIVE
EXPANSION JOINT - DECK TO WALL JOINT
EXPANSION JOINT - DECK TO WALL JOINT - A FOR EPDM
EXPANSION JOINT - DECK TO WALL JOINT - C - ADHESIVE FOR EPDM
EXPANSION JOINT - DECK TO WALL JOINT - C - IN-SEAM TAPE FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT - B FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT "B"
EXPANSION JOINT - FIELD JOINT - RMS
EXPANSION JOINT - FIELD JOINT - RMS FOR EPDM
EXPANSION JOINT CURB WITH CLOSED CELL ROD
EXPANSION JOINT CURB/FIREWALL - ADHESIVE
EXPANSION JOINT CURB/FIREWALL - IN-SEAM TAPE

FM CORNER/PERIMETER FASTENING ENHANCEMENTS - TPO OPTION A
FM CORNER/PERIMETER FASTENING ENHANCEMENTS - TPO OPTION B
MEMBRANE SECUREMENT FOR PVC
PERIMETER ATTACHMENT - OPTION 1 - PERIMETER HALF SHEETS FOR TPO
PERIMETER ATTACHMENT - OPTION 2 - 10 inch RUSS STRIP ALTERNATE FOR TPO
PERIMETER ENHANCEMENT FULL SHEET WITH 9 inch RMS FOR EPDM
PERIMETER SECUREMENT - 10 inch RUSS STRIP FOR EPDM
PERIMETER SHEET ATTACHMENT FOR EPDM
SHEET LAYOUT ON BUILDINGS WITH LARGE OPENINGS FOR TPO
SHEET LAYOUT ON BUILDINGS WITH OVERHANGS FOR TPO

FIELD FABRICATED PIPE FLASHING WITH BANDING CLAMP FOR TPO
FIELD FABRICATED PIPE FLASHING WITH SEAM TAPE FOR TPO
HOT PIPE FLASHING WITH COLD SLEEVE FOR TPO
I-BEAM SUPPORT FLASHING FOR TPO
MULTIPLE PIPE PENETRATION FOR TPO
PITCH PAN MEMBRANE COATED METAL FOR TPO
PREFABRICATED SQUARE TUBING WRAP FOR PVC
PREFABRICATED SQUARE TUBING WRAP FOR TPO
PREMOLDED EPDM PIPE BOOT WITH TAPE - MECHANICALLY ATTACHED
PRE-MOLDED PIPE BOOT FOR TPO
TPO MOLDED SEALANT POCKET
TPO SPLIT PIPE BOOT

FIELD SEAM - PLATE POSITION FOR TPO
FIELD SEAM ATTACHMENT
LAP CROSS SECTION FOR PVC - OPTION 2

BASE FLASHING AT SIDING FOR TPO
WALL FLASHING WITH COUNTERFLASHING FOR TPO

EPDM BASE TIE-IN TO SHINGLE ROOF W/RMS ATTACHMENT FOR EPDM
EPDM BASE TIE-IN TO SHINGLE ROOF W/RMS ATTACHMENT FOR EPDM - OPTION 2
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - ADHESIVE
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - IN-SEAM TAPE
TIE-IN - EXISTING BUR OR MOD BIT
TIE-IN - SHINGLE ROOF - 6 inch RUSS FOR TPO
TIE-IN - SHINGLE ROOF FOR TPO
TIE-IN TO EXISTING BUR / MOD BIT ROOF - RECOVER SITUATION FOR TPO
TIE-IN TO EXISTING EPDM OR HYPALON - TEAR-OFF SITUATION FOR TPO
TIE-IN TO SOLID DECK WITH CURB - CURB PARALLEL TO SLOPE WITH TEAR-OFF FOR TPO

RIDGE ATTACHMENT WITH RMS FOR EPDM
RIDGE FLASHING FOR TPO
RIDGE MEMBRANE ATTACHMENT FOR PVC
RIDGE SHEET LAYOUT FOR TPO
VALLEY FLASHING - 6 inch RUSS FOR TPO - OPTION 2
VALLEY FLASHING 6 inch RUSS FOR TPO - OPTION 1
VALLEY FLASHING FOR TPO - OPTION 1

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
08MHTLP2 MH 2" TL MEMBRANE PLATE 1000/CTN Plastic Pail 1000 14