Skip to content
311 Non-Fibrated Emulsion Roof Coating

311 Non-Fibrated Emulsion Roof Coating

Mule-Hide #311 Non-Fibrated Emulsion Roof Coating stands up to heat, rain and snow and is particularly at home in hot climates. The asphalt-based clay emulsion roof coating protects smooth-surfaced asphalt built-up roofs and modified bitumen roofing membranes. It does not flow when applied in thick coats. When dry, it stays firmly in place, even when exposed to elevated temperatures.

  • Good when used as a base coat prior to application of aluminum or elastomeric coatings.
  • Effective as a base coat for reflective coatings.
  • Also protects metal roofing, masonry, stucco, parapet walls, curbs, and base flashings.
  • Effective in damp-proofing below-grade walls.
  • Can be used as a protective coating on the inside of planter boxes.

System

ModBit
M&R
  • Environmentally friendly. Mule-Hide #311 Non-Fibrated Emulsion Roof Coating is water-based, solvent-free, and non-combustible. No “red tag” label for fire hazard is required.
  • Contains a soft, ductile type of asphalt that makes it highly resistant to rain, snow and heat
  • The heavy-bodied, semi-paste consistency makes it easy to apply with a brush, roller, or sprayer
  • Great bonding strength
  • Exceptional durability and performance over a wide range of challenging temperatures and weather conditions. Will not mud crack and will remain highly resilient and durable through all seasons.
  • Does not damage conventional asphalt-based roofing membranes
  • Meets Miami-Dade-County Standards

Documents

PDS 311 Non-Fibrated Emulsion Roof Coating
View
SDS 311 Non-Fibrated Emulsion Roof Coating
View

Miami-Dade NOA - Asphalt Products NOA
View

Adhesion Test Step-by-Step
View
Asphalt Cements & Coatings Cross Reference Chart
View
Maintenance & Repair Brochure
View
Sell Sheet - 311 Non-Fibrated Emulsion Roof Coating
View

Specifications

Acrylic Roof Coating System for MB and Asp BUR
View

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
16MH311275 MH 311 NON-FIBRATED EMULSION 275 GAL Tote 1 3400 3-4 gallons per 100 sq. ft.
16MH3115 MH 311 NON-FIBRATED EMULSION 5 GAL Metal Pail 1 51 3-4 gallons per 100 sq. ft.
16MH31155 MH 311 NON-FIBRATED EMULSION 55 GAL Drum 1 458 3-4 gallons per 100 sq. ft.

FAQs

Mule-Hide #311 Non-Fibrated Emulsion Roof Coating provides a smooth finish and glide-feel upon applying the product. Performance features and benefits between the #311 and #301 are very comparable, with the main difference being the texture and feel of the product.

The coverage rate for Mule-Hide #311 Non-Fibrated Emulsion Roof Coating is approximately 3 to 4 gallons per 100 sq. ft., depending on the roof surface. The spray requirements are 3,000 psi at 2 to 8 gallons per minute. Tip size = 0.0861<, Fan = 6 inches to 12 inches. (All values are approximate and may vary with ambient temperature and job conditions.)

Mule-Hide #311 Non-Fibrated Emulsion Roof Coating can be applied using a roofing brush, a roller, or a high-pressure sprayer.

The drying time for Mule-Hide #311 Non-Fibrated Emulsion Roof Coating is 6 to 24 hours under good conditions, or 2 to 7 days during damp or cool weather. Actual drying time will vary depending on the specific weather conditions at the jobsite.

No. DO NOT USE Mule-Hide #311 Non-Fibrated Emulsion Roof Coating with PVC, TPO, EPDM or other single-ply roofing membranes.

With proper storage, the shelf life of Mule-Hide #311 Non-Fibrated Emulsion Roof Coating is 18 months from the date of manufacture.

Mule-Hide #311 Non-Fibrated Emulsion Roof Coating should be stored at a temperature of at least 45°F but not above 120°F. It should be stored at room temperature for at least 24 hours prior to use.

Mule-Hide #311 Non-Fibrated Emulsion Roof Coating should only be applied when the ambient temperature is at least 50°F and rising. Cold weather can result in uneven application and improper curing, and it will cause the product to stiffen, making application more difficult. Do not apply Mule-Hide #311 Non-Fibrated Emulsion Roof Coating if there is a threat of rain within 24 hours of application.