Skip to content
416 Standard Non-Fibrated Aluminum Roof Coating

416 Standard Non-Fibrated Aluminum Roof Coating

Mule-Hide #416 Standard Non-Fibrated Aluminum Roof Coating delivers high-performance protection for asphalt-based roofing systems, extending their service lives by shielding them from damaging heat, ultraviolet light, mold, fungus and rust. The heavy-bodied coating delivers excellent reflectivity. It is easier to spread and provides greater coverage than fibrated aluminum roof coatings.

  • Designed for application over new or existing APP or SBS modified bitumen cap sheets (smooth and granulated), asphalt built-up roofs and flashings.
  • Can be used to coat a variety of other substrates, including storage tanks, masonry surfaces, and structural steel.
  • Should only be applied to areas with positive drainage.
  • Product must be mixed very well with a power drill until coating appears silver. Hand mixing is not satisfactory. Average mix time per bucket should be approximately 2 minutes.

System

ModBit
M&R
  • Contains aluminum paste to protect the roof from rust, fungus, and mold
  • Offers excellent weathering characteristics and will not prematurely crack or dry out
  • Good coverage rates over asphalt roofs
  • Forms a strong bond with the base material
  • Does not damage conventional asphalt-based roofing membranes
  • Meets Miami-Dade-County Standards

Documents

PDS 416 Standard Non-Fibrated Aluminum Roof Coating
View
SDS 416 Standard Non-Fibrated Aluminum Roof Coating
View

Florida Product Approval - Cements, Adhesives, Coatings
View
Miami-Dade NOA - Asphalt Products NOA
View

Adhesion Test Step-by-Step
View
Asphalt Cements & Coatings Cross Reference Chart
View
Maintenance & Repair Brochure
View
Sell Sheet - 416 Standard Non-Fibrated Aluminum Roof Coating
View

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
16MH4165 MH 416 STANDARD NON-FIBRATED ALUM 5 GAL Metal Pail 1 44 1-1.5 gallons per 100 sq. ft.
16MH41650 MH 416 STANDARD NON-FIBRATED ALUM 50 GAL Drum 1 465 1-1.5 gallons per 100 sq. ft.

FAQs

For contractors seeking a quality, best-value aluminum roof coating, Mule-Hide #416 Standard Non-Fibrated Aluminum Roof Coating offers exceptional performance. The #410 Premium Non-Fibrated Aluminum Roof Coating should be considered when optics and aesthetics are the paramount objective.

The coverage rate for Mule-Hide #416 Standard Non-Fibrated Aluminum Roof Coating is approximately 1 to 1.5 gallons per 100 sq. ft. The spray requirements are 3,000 psi at 1.5 gallons per minute. Tip size = 0.033 to 0.067, Fan = 6 inches. (All values are approximate and may vary with ambient temperature and job conditions.)

Mule-Hide #416 Standard Non-Fibrated Aluminum Roof Coating can be applied using a high-pressure sprayer, a roller, or a brush.

NO. DO NOT apply Mule-Hide #416 Standard Non-Fibrated Aluminum Roof Coating to PVC, TPO, EPDM or other single-ply roofing membranes.

With proper storage, the shelf life of Mule-Hide #416 Standard Non-Fibrated Aluminum Roof Coating is 24 months from the date of manufacture.

Mule-Hide #416 Standard Non-Fibrated Aluminum Roof Coating should be stored at a temperature of at least 45°F but not above 120°F. It should be stored at room temperature for at least 24 hours prior to use.

Mule-Hide #416 Standard Non-Fibrated Aluminum Roof Coating should only be applied when the ambient temperature is at least 50°F and rising. Cold weather can result in uneven application and improper curing, and it will cause the product to stiffen, making application more difficult. Do not apply Mule-Hide #416 Standard Non-Fibrated Aluminum Roof Coating if there is a threat of inclement weather within 24 hours of application.