Skip to content
Drill Point Fasteners (#12)

Drill Point Fasteners (#12)

Drill Point Fasteners (#12) are specifically engineered to secure insulation, coverboards and base sheets to corrugated steel (16 – 22 ga.) and wood substrates. Featuring a #2 double flute self-drilling point and exclusive tapered entry thread design, penetrating steel quickly and offering exceptional back-out resistance. Available with #3 Phillips Head.

System

EPDM
TPO
PVC
ModBit
  • #12 Drill Point Fastener
  • For insulation and cover boards only, not for membrane attachment
  • A all-purpose fastener used for insulation, cover boards and attached nailers
  • Cannot be used for membrane attachment in system warranties
  • Available in #3 Phillips (one bit per container)
  • Not recommended for concrete, use a #14 instead
  • Meets UL Standards
  • Meets FM Standards
  • Meets Miami-Dade-County Standards
  • Meets ICC-ES Standards

Documents

PDS Drill Point Fasteners-12
View
SDS - Statement for Article Products
View

Single-Ply Roofing Accessories Guide
View
Tech Bulletin Guidelines for Fastener Pull Tests
View

Details

BASE ATTACHMENT - TPO FLEECE BACK RECOVER SYSTEMS ONLY

BASE FLASHING - AREA DIVIDER MODBIT OPTION 2
BASE FLASHING - MODBIT OPTION 1
BASE FLASHING - MODBIT OPTION 9
BASE FLASHING - OPTION 1
BASE FLASHING - OPTION 10
BASE FLASHING - OPTION 2
BASE FLASHING - OPTION 3
BASE FLASHING - OPTION 4
BASE FLASHING - OPTION 5
BASE FLASHING - OPTION 6
BASE FLASHING - OPTION 7
BASE FLASHING - OPTION 8
BASE FLASHING - OPTION 9
BASE FLASHING FOR VENTED PERIMETER FOR MODBIT
BASE FLASHING W/CANT - MODBIT OPTION 3
BASE FLASHING W/CANT - OPTION 3
BASE FLASHING WITH METAL COUNTERFLASHING FOR MODBIT
HIGH WALL PARAPET FLASHING FOR MODBIT
View
PARAPET/CURB FLASHING FOR EPDM

DRAIN INSERT FOR EPDM
DUTCH GUTTER FOR EPDM AND TPO
FLANGED GUTTER WITHOUT DRIP EDGE
GUTTER DETAIL - MOD BIT OPTION 1
GUTTER DETAIL -MOD BIT OPTION 2
GUTTER WITH DRIP EDGE FOR MOD BIT - OPTION 2
INTERMITTENT WALL SCUPPER FOR EPDM
ROOF DRAIN FOR EPDM AND TPO

NAIL BASE FASTENING PATTERN FM 1-60
NAIL BASE FASTENING PATTERN FM 1-90

2 inch OR THICKER INSULATION ATTACHMENT - 8 FASTENERS PER 4ft X 8ft BOARD
Extruded Polystyrene Insulation Attachment Fastening Patterns
FM - 12 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 16 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 17 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 8 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
INSULATION ATTACHMENT - 12 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT - 16 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT - 17 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT PATTERNS FOR MECHANICALLY ATTACHED SYSTEMS
INSULATION ATTACHMENT WITH MODBIT - 16 FIELD FASTENERS PER 4FT X 8FT BOARD - OPTION 1
INSULATION ATTACHMENT WITH MODBIT - 17 FIELD FASTENERS PER 4FT X 8FT BOARD- OPTION 5
INSULATION ATTACHMENT WITH MODBIT - 24 FIELD FASTENERS PER 4FT X 8FT BOARD - OPTION 3
INSULATION ATTACHMENT WITH MODBIT - 28 FIELD FASTENERS PER 4FT X 8FT BOARD - OPTION 4
INSULATION ATTACHMENT WITH MODBIT - 8 FIELD FASTENERS PER 4FT X 8FT BOARD - OPTION 2

FIELD FABRICATED PIPE FLASHING WITH WHITE UNCURED EPDM
HOT PIPE FLASHING WITH COLD SLEEVE WITH UNCURED EPDM
PRE-MOLDED PIPE BOOT - WHITE EPDM
WHITE EPDM PREFABRICATED SEALANT POCKET

ALL PURPOSE BAR TERMINATION for EPDM
BALLASTED RETAINER BAR FOR EPDM
DRIP APRON / GUTTER TERMINATION EPDM
DRIP APRON TERMINATION FOR EPDM
DRIP EDGE - MOD BIT OPTION 2
DRIP EDGE AT MANSARD FOR EPDM
EDGE METAL FLASHING - MOD BIT OPTION 1
EDGE METAL FLASHING - MOD BIT OPTION 2
EDGE METAL FLASHING - MOD BIT OPTION 3
EDGE METAL FLASHING - MOD BIT OPTION 4
GRAVEL STOP - MODBIT OPTION 1
GRAVEL STOP - MODBIT OPTION 2
GRAVEL STOP - MODBIT OPTION 3
GRAVEL STOP TERMINATION FOR EPDM
GRAVEL STOP WITH SCUPPER FOR EPDM
GRAVEL STOP WITH SNAP LOCK FASCIA FOR EPDM
WOOD NAILER ATTACHMENT FOR PVC

WALL FLASHING TERMINATION FOR MODBIT - OPTION 1
WALL FLASHING TERMINATION FOR MODBIT - OPTION 2
WALL FLASHING TERMINATION FOR MODBIT - OPTION 3
WALL FLASHING TERMINATION FOR MODBIT - OPTION 4
WALL FLASHING TERMINATION FOR MODBIT - OPTION 5

Specifications

Single-Ply Insulation Attachment Guidelines
View

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
08MHDP158 MH 1-5/8" #12 DP FASTENER 1000/CTN Plastic Pail 1000 12
08MHDP214 MH 2-1/4" #12 DP FASTENER 1000/CTN Plastic Pail 1000 16
08MHDP5 MH 5" #12 DP FASTENER 1000/CTN Plastic Pail 1000 32
08MHDP6 MH 6" #12 DP FASTENER 1000/CTN Plastic Pail 1000 37
08MHDP75 MH 7" #12 DP FASTENER 500/CTN Plastic Pail 500 21
08MHDP85 MH 8" #12 DP FASTENER 500/CTN Plastic Pail 500 24
08MHDP3 MH 3" #12 DP FASTENER 1000/CTN Plastic Pail 1000 21
08MHDP4 MH 4" #12 DP FASTENER 1000/CTN Plastic Pail 1000 26

Videos