Skip to content
EPDM T-Joint Patches

EPDM T-Joint Patches

Used to seal field splice joints or a horizontal-to-vertical field seam transition. 40 mil (1 mm) thick uncured EPDM flashing material laminated to cured butyl rubber tape and rolled onto a poly release liner for a total thickness of 70 mils (1.75 mm). This product requires the use of Tape Primer or Low VOC Tape Primer.

System

EPDM
  • Pre-cut uncured flashing tape available in 6" and 12"
  • Available in black only
  • Required on all EPDM projects
  • Must be installed with Tape Primer and Lap Sealant
  • Meets ICC-ES Standards

Documents

PDS EPDM T-Joint Patches-black
View
PDS Pre-Cut Inside Outside Corners and T- Patches-White
View
SDS - Statement for Article Products
View

Maintenance & Repair Brochure
View
Single-Ply Roofing Accessories Guide
View

Details

2-PIECE INSIDE CORNER WALL FLASHING FOR EPDM
INSIDE CORNER WITH CONTINUOUS EPDM WALL FLASHING - 90 MIL EPDM
View
OUTSIDE CORNER WITH UNCURED FLASHING TAPE - 90 MIL EPDM
View

PARAPET/CURB WITH SEPARATE EPDM MEMBRANE - 90 MIL EPDM
View

PERIMETER ENHANCEMENT FULL SHEET WITH 9 inch RMS FOR EPDM
PERIMETER SHEET ATTACHMENT FOR EPDM

END LAP AND T-JOINT DETAIL FOR EPDM
MEMBRANE SPLICE WITH IN-SEAM TAPE - 90 MIL
View
WALL FLASHING WITH CONTINUOUS MEMBRANE - 90 MIL EPDM
View

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
08MHETJ12B MH EPDM T-JOINT COVERS 12X12 BLACK 20/CT Box 20 10
08MHETJ6B MH EPDM T-JOINT COVERS 6"X6" BLACK 20/CT Box 20 3
08MHETJ6G MH EPDM T-JOINT COVERS 6"X6" GRAY 20/CT 20 0

Videos