Skip to content
Gray EPDM

NEW-PRODUCT

Gray EPDM

Our Gray EPDM membrane is used in fully adhered roofing systems in new construction, reroofing and recover (retrofit) applications. It may also be used as flexible membrane flashings for walls, curbs, etc, when installing an EPDM membrane roofing system. The system must be installed over acceptable roof insulation or other suitable substrate. 

System

EPDM
  • Outstanding weatherability
  • Pre-taped sheets available for labor savings and consistent seam placement
  • Requires no special equipment to install
  • Full line of pre-taped accessories available
  • Gray EPDM can be an ideal choice in markets where heating and cooling costs are more balanced
  • Added slip resistance of rubber and less glare than white roofs
  • Gray EPDM offers reflectivity while still providing winter heat gains
  • Gray EPDM allows the roof to dry faster than white membranes
  • Meets UL Standards
  • Meets FM Standards
  • Meets CRRC Standards
  • Meets ICC-ES Standards

Documents

PDS Gray EPDM
View
SDS - Statement for Article Products
View
TIE-IN EXISTING EPDM OR HYPALON TEAR-OFF SITUATION
View

CCMC - Canadian Construction Materials Centre evaluation for EPDM Systems
View
Florida Product Approval - EPDM Systems
View
Florida Product Approval HVHZ - EPDM Systems
View
ICC-ESR Report - Adhered and Mech. Attached EPDM Systems, TPO Systems & PVC Systems
View
UL - Impact resistance ratings for EPDM Systems
View
UL - Overview of UL Listings for EPDM Systems
View
UL - Summary of UL Listings for EPDM Systems
View

EPDM Cross Reference Chart
View
EPDM Pocket Guide
View
EPDM Pocket Guide (Spanish)
View
EPDM Systems Contractor Brochure
View
Hail Coverage - Procedures and Requirements
View
Letter of Compliance Application- Photovoltaic Installation on Mule-Hide Warranted Roof
View
Modular Roofing Systems Brochure
View
Procedure for Inclusion of Photovoltaic Anchor Flashings
View
Reduced Fastener Requirements for Uplift Ratings
View
Single-Ply Roofing Accessories Guide
View
Talking Points - 20-Year EPDM Warranty
View
Talking Points - EPDM X-23
View
Tech Bulletin - Pactiv GreenGuard Insulation
View

Design Enhancements - Single-Ply Membranes
View

Details

6 inch RMS ATTACHMENT STRIP
6 inch RMS WITH TAPE
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/6 inch IN-SEAM TAPE
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/ADHESIVE
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/COVER TAPE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/3 inch IN-SEAM TAPE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/6 inch IN-SEAM TAPE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/ADHESIVE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/COVER TAPE
PARAPET/CURB FLASHING BAR HORIZONTAL ATTACHMENT W/3 inch IN-SEAM TAPE
PARAPET/CURB FLASHING RMS W/TAPE - HORIZONTAL
PARAPET/CURB FLASHING RMS W/TAPE - VERTICAL

2-PIECE INSIDE CORNER WALL FLASHING FOR EPDM
EPDM OUTSIDE CORNER - ONE PIECE WRAP
EPDM OUTSIDE CORNER - TWO PIECE

PARAPET/CURB FLASHING FOR EPDM
SLEEPER FOR EPDM
WELDED CURB FLASHING
WELDED CURB FLASHING - AP BAR TERMINATION
WELDED CURB FLASHING - HIGH CURB FOR EPDM
WELDED CURB FLASHING FOR EPDM
WELDED CURB OVER FIELD MEMBRANE WITH CURED OR UNCURED FLASHING TAPE
WOOD CURB OVER FIELD MEMBARNE WITH SEAM TAPE
WOOD CURB WITH ALL PURPOSE BAR AND SEAM TAPE FOR EPDM

DRAIN INSERT FOR EPDM
DUTCH GUTTER FOR EPDM AND TPO
INTERMITTENT WALL SCUPPER FOR EPDM
PREMANUFACTURED CONDUCTOR HEAD
ROOF DRAIN FOR EPDM
ROOF DRAIN FOR EPDM AND TPO
ROOF DRAIN WITH SUMP FOR EPDM
ROOF DRAIN WITH TAPERED INSULATION FOR EPDM

12 inch SELF-BRIDGING MATE-LINE
9 inch SELF-BRIDGING MATE-LINE
DECK TO WALL JOINT - A - RMS STRIP - ADHESIVE
EXPANSION JOINT - DECK TO WALL JOINT - A FOR EPDM
EXPANSION JOINT - DECK TO WALL JOINT - C - ADHESIVE FOR EPDM
EXPANSION JOINT - DECK TO WALL JOINT - C - IN-SEAM TAPE FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT - A FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT - B FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT "A"
EXPANSION JOINT - EXISTING FIELD JOINT "B"
EXPANSION JOINT - FIELD JOINT
EXPANSION JOINT - FIELD JOINT - RMS
EXPANSION JOINT - FIELD JOINT - RMS FOR EPDM
EXPANSION JOINT - FIELD JOINT FOR EPDM
EXPANSION JOINT CURB/FIREWALL - ADHESIVE
EXPANSION JOINT CURB/FIREWALL - IN-SEAM TAPE
MATE-LINE WITH COVER TAPE
MATE-LINE WITH COVER TAPE - WOOD BRIDGING MATERIAL
RAISED MATE-LINE

4" TRAY PROFILE
CORNER FOLD DETAIL FOR EPDM
TRANSITION TO WALKWAY
WALKWAY PAVER FOR EPDM AND TPO

2 inch OR THICKER INSULATION ATTACHMENT - 8 FASTENERS PER 4ft X 8ft BOARD
FM - 10 Field Fasteners per 4'x8' Board
FM - 12 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 16 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 17 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 6 Field Fasteners per 4'x8' Board
FM - 8 Field Fasteners per 4'x8' Board
HELIX MAX FOAM ADHESIVE 12" RIBBON PATTERN
HELIX MAX FOAM ADHESIVE 4" RIBBON PATTERN
HELIX MAX FOAM ADHESIVE 6" RIBBON PATTERN
INSULATION ATTACHMENT - 12 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT - 16 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT - 17 FASTENERS PER 4ft X 8ft IN FIELD

ROOF CORNER AND PERIMETER DETAIL

FIELD FABRICATED HOT PIPE - ADHESIVE FOR EPDM
FIELD FABRICATED HOT STACK - 90 MIL EPDM
View
FIELD FABRICATED PIPE FLASHING - ADHESIVE
FIELD FABRICATED PITCH PAN - ADHESIVE
LIGHTNING ROD - HORIZONTAL ATTACHMENT FOR EPDM
LIGHTNING ROD - VERTICAL ATTACHMENT FOR EPDM
POURABLE SEALER POCKET FOR EPDM
PRE-FABRICATED METAL PITCH PAN FOR EPDM
PREMOLDED EPDM PIPE BOOT WITH TAPE

ALL PURPOSE BAR TERMINATION - 90 MIL EPDM
View
ALL PURPOSE BAR TERMINATION for EPDM
ALL PURPOSE BAR TERMINATION WITH FASCIA BOARD
ALL PURPOSE BAR TERMINATION Z-CLIP CAP
ALL PURPOSE BAR TERMINATION Z-CLIP CAP W/VINYL SIDING
BALLASTED RETAINER BAR FOR EPDM
Batten Bar with Cover Strip
DRIP APRON / GUTTER TERMINATION EPDM
DRIP EDGE - 90 MIL EPDM
View
DRIP EDGE AT MANSARD FOR EPDM
EDGE TERMINATION - ALL-PURPOSE BAR FOR EPDM
EDGE TERMINATION BAR WITH COVER FOR EPDM
EDGE TERMINATION BAR WITH COVER FOR EPDM - OPTION 2
EDGE TERMINATION J-CHANNEL FOR EPDM
EDGE TERMINATION J-CHANNEL FOR EPDM - OPTION 2
GRAVEL STOP TERMINATION FOR EPDM
GRAVEL STOP WITH SNAP LOCK FASCIA FOR EPDM
GUTTER WITH METAL FASCIA AND ALL PURPOSE BAR FOR EPDM
J-CHANNEL TERMINATION WITH FASCIA BOARD FOR EPDM - OPTION 1
J-CHANNEL TERMINATION WITH FASCIA BOARD FOR EPDM - OPTION 2
PERIMETER EDGE WITH FASCIA BOARD FOR EPDM
PREMANUFACTURED 2-PIECE COMPRESSION LARGE EDGE DETAIL FOR EPDM - OPTION 2
PREMANUFACTURED ARCHED DRIP EDGE W/SPLICE CLEAT FOR EPDM

END LAP AND T-JOINT DETAIL FOR EPDM
MEMBRANE SPLICE W/3 inch IN-SEAM TAPE
MEMBRANE SPLICE W/6 inch IN-SEAM TAPE
MEMBRANE SPLICE W/SPLICE ADHESIVE - 6 inch SEAM
MEMBRANE SPLICE WITH IN-SEAM TAPE - 3 inch SEAM
MEMBRANE SPLICE WITH SPLICE ADHESIVE - 3 inch SEAM

MODULAR EPDM Mate-Line- Cover Tape
PREMANUFACTURED ARCHED COPING WITH SPLICE PLATE
PREMANUFACTURED METAL EDGE EXTENDER
PREMANUFACTURED REGLET COUNTERFLASHING
PREMANUFACTURED SURFACE MOUNTED COUNTERFLASHING
VERTICAL TERMINATION COUNTERFLASHING FOR EPDM
VERTICAL TERMINATION COUNTERFLASHING W/A-P BAR FOR EPDM
VERTICAL TERMINATION METAL COPING FOR EPDM
VERTICAL TERMINATION REGLET FOR EPDM
VERTICAL TERMINATION STONE COPING FOR EPDM
VERTICAL TERMINATION WITH A-P BAR FOR EPDM

EPDM BASE TIE-IN TO SHINGLE ROOF ALL PURPOSE BAR ATTACHMENT FOR EPDM
EPDM BASE TIE-IN TO SHINGLE ROOF W/RMS ATTACHMENT FOR EPDM
EPDM BASE TIE-IN TO SHINGLE ROOF W/RMS ATTACHMENT FOR EPDM - OPTION 2
EPDM TIE-IN HOT STRIPPING
EPDM TIE-IN TO BUILT-UP ROOF - ADHESIVE
EPDM TIE-IN TO BUILT-UP ROOF - IN-SEAM TAPE
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - ADHESIVE
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - IN-SEAM TAPE
SEGREGATION DETAIL/GREEN ROOF AND EXISTING ROOF
SEGREGATION DETAIL/GREEN ROOF AND EXPOSED SINGLE PLY

RIDGE ATTACHMENT WITH RMS FOR EPDM

Specifications

Specification - EPDM Systems Fully Adhered
View
Specification Supplement - AeroWeb Adhesive
View
Summary Specification - EPDM Systems Fully Adhered
View

Guide - EPDM Systems and Acrylic water base bonding adhesive
View
Guide - EPDM Systems and Solvent Base Bonding Adhesive
View
Guide - EPDM Systems Design Guidelines
View
Guide - EPDM Systems Flashing and Adhesive Guidelines
View
Guide - Insulation Guidelines
View
Guide - Roof Mounted Photovoltaic Installations
View
Single-Ply Insulation Attachment Guidelines
View
Tech Note - Design Wind Speed vs Warranted Wind Speed
View
Tech Note - Sheet Flutter on Mechanically Attached Systems
View

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
07MH610X1G MH EPDM 060 10'X100' GRAY NR 0 1000 Sq. Ft/RL
07MHA6113G MH 060 EPDM GRAY 10' X 100' w/3"TAPE 0 1000 Sq. Ft/RL
07MH610X5G MH EPDM 060 10'X50' GRAY NR 0 500 Sq. Ft/Roll

Videos