Skip to content
ShapeShift® Kits

ShapeShift® Kits

ShapeShift® Kits put everything needed to create pitch pans in one convenient package. The “grab-and-go” kits are available in two sizes to accommodate jobs of various sizes.

Large kits contain 16 ShapeShift corner sections, 16 ShapeShift straight sections, 3 - 2 liter pouches of MP Liquid Sealant in white and three cartridges of JTS 1 joint and termination sealant in white. Large kits create four 7- by 7-inch pitch pans.

Small kits contain 16 ShapeShift corner sections, 1 - 2 liter pouch of MP Liquid Sealant in white and two cartridges of JTS 1 in white. Small kits create four 4- by 4-inch pitch pans.

ShapeShift kits can be used to create pitch pans for acrylic-coated, smooth modified bitumen, and smooth built-up roofing systems.

Colors

System

M&R
  • Can be used vertically with JTS1 as a filler or horizontally with MP Liquid Sealant as a filler
  • No-weld repair for TPO projects
  • One solution for EPDM, TPO, PVC, Metal, SPF, EAC, Mod Bit and BUR roofs
  • Large kits create four 7- by 7-inch pitch pans
  • Small kits create four 4- by 4-inch pitch pans

Documents

PDS Shape Shift Pitch Pan
SDS JTS 1 - Joint and Termination Sealant
SDS MP Liquid Sealant

Sell Sheet - ShapeShift

Details

Vertical Sealant Pocket - All EPDM Systems
Vertical Sealant Pocket - All Mod Bit Systems
Vertical Sealant Pocket - All PVC Systems
Vertical Sealant Pocket - All TPO Systems

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
08MHSPKLWH MH SHAPESHIFT PITCH PAN KIT LARGE CTN 12
08MHSPKSWH MH SHAPESHIFT PITCH PAN KIT SMALL CTN 6

FAQs

No. Pitch pan pieces are manufactured from a white high-strength polymer.

ShapeShift pitch pans only require priming on certain surfaces to ensure proper adhesion of the pan itself. Si TPO Primer is required on TPO membranes and 2-Part Epoxy Primer is required on Mod Bit and BUR surfaces. There is no need to use primer with ShapeShift pans when installed over EPDM, PVC or metal surfaces.

No primer is required on the inside surfaces of the pan prior to installing the ShapeShift Sealer.

No, not at this time. Although it can be made in any size, the pans must be either a square or a rectangle.

MP Liquid Sealant is available in White or Black. But only white in the kits.

Absolutely, and it is approved for use on MHP system warranties. When filled with JTS 1 sealant, ShapeShift pans provide an excellent way to flash those troublesome cables or conduits that penetrate parapet walls when a prefabricated pipe boot or split pipe boot will not work.

Cartons are available in straights and corners. A carton of straights contains 16 pieces. A carton of corners contains 48 or 16 pieces.