Skip to content
TL Fasteners & Plates

TL Fasteners & Plates

TL Fastener is designed to mechanically attach rigid insulation board and single-ply membrane to structural cement wood fiber, gypsum and lightweight insulating concrete roof decks. Features a high-thread profile with a tapered root diameter and sharp point. Its unique design allows it to penetrate the roof deck and progressively compact the base material, creating a stronger hold in weak material. Used in conjunction with the 2" TL Seam Plate and 3" TL Insulation Plate.

System

EPDM
TPO
PVC
ModBit
  • Used with Tectum and Gypsum
  • Large diameter, glass-filled nylon auger fastener with special 2" TL Seam Plate for fastening membrane and 3" Insulation Plate
  • A pilot hole is required when used in gypsum
  • A 1/4" square drive is needed to install
  • Meets UL Standards
  • Meets FM Standards
  • Meets Miami-Dade-County Standards
  • Meets ICC-ES Standards

Documents

PDS TL Fasteners
View
SDS - Statement for Article Products
View

Single-Ply Roofing Accessories Guide
View

Details

BASE ATTACHMENT - FLEECE BACK
BASE ATTACHMENT - TPO FLEECE BACK RECOVER SYSTEMS ONLY
BASE ATTACHMENT USING 6 inch STANDARD TPO-C MEMBRANE
BASE ATTACHMENT USING 9 inch INVERTED FLEECE BACK
BASE ATTACHMENT WITH 6 inch RUSS
BASE ATTACHMENT WITH PLATES AND FASTENERS
DOOR THRESHOLD FLASHING
PARAPET FLASHING FOR PVC

FIELD FABRICATED INSIDE CORNER FOR PVC
FIELD FABRICATED OUTSIDE CORNER FOR PVC
INSIDE CORNER - UNCURED EPDM
PRE-MOLDED INSIDE CORNER FLASHING FOR PVC
PRE-MOLDED OUTSIDE CORNER FOR PVC

BASE FLASHING - AREA DIVIDER MODBIT OPTION 2
BASE FLASHING - MODBIT OPTION 9
BASE FLASHING - OPTION 10
BASE FLASHING - OPTION 3
BASE FLASHING - OPTION 6
BASE FLASHING - OPTION 7
BASE FLASHING - OPTION 8
BASE FLASHING - OPTION 9
BASE FLASHING W/CANT - MODBIT OPTION 3
BASE FLASHING W/CANT - OPTION 3
CURB FLASHING FOR PVC
CURB FLASHING FOR TPO
CURB/WALL FLASHING WITH M-H ALL-PURPOSE BAR - FLEECE BACK & SELF-ADHERING TPO
CURB/WALL FLASHING WITH M-H ALL-PURPOSE BAR FOR TPO
DRAIN FLASHING WITH TARGET - FLEECE BACK
DRAIN FLASHING WITH TARGET - FLEECE BACK AND SELF-ADHERING TPO
INSULATED PARAPET WALL WITH METAL COPING CAP FOR TPO
SLEEPER FOR EPDM

DRAIN FLASHING WITH TARGET PATCH FOR TPO
GUTTER DETAIL -MOD BIT OPTION 2
MECHANICALLY FASTENED TARGET ROOF DRAIN FOR PVC
RETROFIT DRAIN INSERT - COMPRESSION TYPE INSERT FOR TPO

DECK TO WALL JOINT - A - RMS STRIP - ADHESIVE
EXPANSION JOINT - DECK TO WALL JOINT
EXPANSION JOINT - DECK TO WALL JOINT - A FOR EPDM
EXPANSION JOINT - DECK TO WALL JOINT - C - ADHESIVE FOR EPDM
EXPANSION JOINT - DECK TO WALL JOINT - C - IN-SEAM TAPE FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT - B FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT "B"
EXPANSION JOINT - FIELD JOINT - RMS
EXPANSION JOINT - FIELD JOINT - RMS FOR EPDM
EXPANSION JOINT CURB WITH CLOSED CELL ROD
EXPANSION JOINT CURB/FIREWALL - ADHESIVE
EXPANSION JOINT CURB/FIREWALL - IN-SEAM TAPE

NAIL BASE FASTENING PATTERN FM 1-60
NAIL BASE FASTENING PATTERN FM 1-90

2 inch OR THICKER INSULATION ATTACHMENT - 8 FASTENERS PER 4ft X 8ft BOARD
Extruded Polystyrene Insulation Attachment Fastening Patterns
FM - 12 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 16 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 8 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
INSULATION ATTACHMENT - 12 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT - 16 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT - 17 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT PATTERNS FOR MECHANICALLY ATTACHED SYSTEMS
INSULATION ATTACHMENT WITH MODBIT - 16 FIELD FASTENERS PER 4FT X 8FT BOARD - OPTION 1
INSULATION ATTACHMENT WITH MODBIT - 17 FIELD FASTENERS PER 4FT X 8FT BOARD- OPTION 5
INSULATION ATTACHMENT WITH MODBIT - 24 FIELD FASTENERS PER 4FT X 8FT BOARD - OPTION 3
INSULATION ATTACHMENT WITH MODBIT - 28 FIELD FASTENERS PER 4FT X 8FT BOARD - OPTION 4
INSULATION ATTACHMENT WITH MODBIT - 8 FIELD FASTENERS PER 4FT X 8FT BOARD - OPTION 2

FM CORNER/PERIMETER FASTENING ENHANCEMENTS - TPO OPTION A
FM CORNER/PERIMETER FASTENING ENHANCEMENTS - TPO OPTION B
MEMBRANE SECUREMENT FOR PVC
PERIMETER ATTACHMENT - OPTION 1 - PERIMETER HALF SHEETS FOR TPO
PERIMETER ATTACHMENT - OPTION 2 - 10 inch RUSS STRIP ALTERNATE FOR TPO
PERIMETER ENHANCEMENT FULL SHEET WITH 9 inch RMS FOR EPDM
PERIMETER SECUREMENT - 10 inch RUSS STRIP FOR EPDM
PERIMETER SHEET ATTACHMENT FOR EPDM
SHEET LAYOUT ON BUILDINGS WITH LARGE OPENINGS FOR TPO
SHEET LAYOUT ON BUILDINGS WITH OVERHANGS FOR TPO

FIELD FABRICATED PIPE FLASHING WITH BANDING CLAMP FOR TPO
FIELD FABRICATED PIPE FLASHING WITH SEAM TAPE FOR TPO
FIELD FABRICATED PIPE FLASHING WITH WHITE UNCURED EPDM
HOT PIPE FLASHING WITH COLD SLEEVE WITH UNCURED EPDM
I-BEAM SUPPORT FLASHING FOR TPO
MULTIPLE PIPE PENETRATION FOR TPO
PITCH PAN MEMBRANE COATED METAL FOR TPO
PREFABRICATED SQUARE TUBING WRAP FOR PVC
PREFABRICATED SQUARE TUBING WRAP FOR TPO
PREMOLDED EPDM PIPE BOOT WITH TAPE - MECHANICALLY ATTACHED
PRE-MOLDED PIPE BOOT - WHITE EPDM
PRE-MOLDED PIPE BOOT FOR TPO
TPO MOLDED SEALANT POCKET
TPO SPLIT PIPE BOOT
WHITE EPDM PREFABRICATED SEALANT POCKET

EDGE METAL FLASHING - MOD BIT OPTION 4
GRAVEL STOP - MODBIT OPTION 2

FIELD SEAM - PLATE POSITION FOR TPO
FIELD SEAM ATTACHMENT
LAP CROSS SECTION FOR PVC - OPTION 2

BASE FLASHING AT SIDING FOR TPO
WALL FLASHING WITH COUNTERFLASHING FOR TPO

EPDM BASE TIE-IN TO SHINGLE ROOF W/RMS ATTACHMENT FOR EPDM - OPTION 2
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - ADHESIVE
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - IN-SEAM TAPE
TIE-IN - EXISTING BUR OR MOD BIT
TIE-IN - SHINGLE ROOF - 6 inch RUSS FOR TPO
TIE-IN - SHINGLE ROOF FOR TPO
TIE-IN TO EXISTING BUR / MOD BIT ROOF - RECOVER SITUATION FOR TPO
TIE-IN TO EXISTING EPDM OR HYPALON - TEAR-OFF SITUATION FOR TPO
TIE-IN TO SOLID DECK WITH CURB - CURB PARALLEL TO SLOPE WITH TEAR-OFF FOR TPO

RIDGE ATTACHMENT WITH RMS FOR EPDM
RIDGE FLASHING FOR TPO
RIDGE MEMBRANE ATTACHMENT FOR PVC
RIDGE SHEET LAYOUT FOR TPO
VALLEY FLASHING - 6 inch RUSS FOR TPO - OPTION 2
VALLEY FLASHING 6 inch RUSS FOR TPO - OPTION 1
VALLEY FLASHING FOR TPO - OPTION 1

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
08MHTL10 MH 10" TL FASTENER 250/CTN Plastic Pail 250 22
08MHTL2 MH 2" TL FASTENER 500/CTN Plastic Pail 500 12
08MHTL212 MH 2-1/2" TL FASTENER 500/CTN Plastic Pail 500 13
08MHTL3 MH 3" TL FASTENER 500/CTN Plastic Pail 500 15
08MHTL312 MH 3-1/2" TL FASTENER 500/CTN Plastic Pail 500 16
08MHTL4 MH 4" TL FASTENER 500/CTN Plastic Pail 500 19
08MHTL412 MH 4-1/2" TL FASTENER 500/CTN Plastic Pail 500 21
08MHTL5 MH 5" TL FASTENER 500/CTN Plastic Pail 500 23
08MHTL512 MH 5-1/2" TL FASTENER 500/CTN Plastic Pail 500 25
08MHTL6 MH 6" TL FASTENER 500/CTN Plastic Pail 500 26
08MHTL612 MH 6-1/2" TL FASTENER 500/CTN Plastic Pail 500 28
08MHTL7 MH 7" TL FASTENER 250/CTN Plastic Pail 250 15
08MHTL8 MH 8" TL FASTENER 250/CTN Plastic Pail 250 17
08MHTL9 MH 9" TL FASTENER 250/CTN Plastic Pail 250 20
08MHTL712 MH 7 1/2" TL FASTENER 250/CTN Plastic Pail 250 16
08MHTL812 MH 8 1/2" TL FASTENER 250/CTN Plastic Pail 250 19
08MHTL912 MH 9 1/2" TL FASTENER 250/CTN Plastic Pail 250 21
08MHTL11 MH 11" TL FASTENER 250/CTN Plastic Pail 250 25
08MHTL12 MH 12" TL FASTENER 250/CTN Plastic Pail 250 26
08MHTL13 MH 13" TL FASTENER 250/CTN Plastic Pail 250 28
08MHTL14 MH 14" TL FASTENER 250/CTN Plastic Pail 250 29