Skip to content
TPO 60 Mil Non-Reinforced Flashing

TPO 60 Mil Non-Reinforced Flashing

Primarily used to seal details where field fabrication is necessary, such as drain details, pipe flashings, pitch pocket flashings, seaming joints of the Mule-Hide TPO Coated Metal and any place where reinforced membrane is not practical.

Colors

System

TPO
  • Used as formable flashing on pipes, corners, etc.
  • Used as T-Joint patches and tie-ins
  • 60 Mil thickness
  • Available in 12" and 24" widths
  • Available in multiple colors
  • Must be pre-heated and pre-stretched prior to installation
  • Meets ICC-ES Standards

Documents

PDS TPO 60 Mil Non-Reinforced Flashing
View
SDS - Statement for Article Products
View

Maintenance & Repair Brochure
View
Single-Ply Roofing Accessories Guide
View

Details

FIELD FABRICATED INSIDE CORNER FOR TPO
FIELD FABRICATED OUTSIDE CORNER FOR TPO
INSIDE CORNER FOR TPO
INSIDE CORNER USING RUSS FOR TPO

PARAPET/CURB FLASHING FOR EPDM

GRAVEL STOP SCUPPER - TPO COATED METAL
INTERMITTENT WALL SCUPPER FOR EPDM
THROUGH-WALL SCUPPER - TPO COATED METAL
THROUGH-WALL SCUPPER - TPO COATED METAL

FIELD FABRICATED PIPE FLASHING WITH BANDING CLAMP FOR TPO
FIELD FABRICATED PIPE FLASHING WITH SEAM TAPE FOR TPO
HOT PIPE FLASHING WITH COLD SLEEVE FOR TPO
I-BEAM SUPPORT FLASHING FOR TPO
MULTIPLE PIPE PENETRATION FOR TPO
PITCH PAN MEMBRANE COATED METAL FOR TPO
TPO MOLDED SEALANT POCKET

METAL RETROFIT - MEMBRANE COATED DRIP EDGE WITH GUTTER FOR TPO
PREMANUFACTURED MEMBRANE COATED METAL PITCH PAN FOR TPO

METAL RETROFIT - 10 inch RUSS RIDGE SECUREMENT DETAIL FOR TPO
METAL RETROFIT - 100 MPH OR LESS WIDE SHEETS WITH SEAMS OVER PURLINS FOR TPO
METAL RETROFIT - 100 MPH OR LESS WIND ZONES MECHANICALLY ATTACHED SYSTEM FOR TPO - OPTION 1
METAL RETROFIT - 100 MPH OR LESS WIND ZONES MECHANICALLY ATTACHED SYSTEM FOR TPO - OPTION 2
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 1
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 2
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 3
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 4
METAL RETROFIT - 101-120 MHP WIND ZONES NARROW SHEETS WITH SEAMS OVER PURLINS
METAL RETROFIT - SEAM FASTENING NARROW ROLLS MEMBRANE SECUREMENT FOR TPO
SEAM PATCH AT FIELD/WALL TRANSITION FOR TPO
T-JOINT COVER - 60 MIL OR THICKER MEMBRANES FOR TPO

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
08MHDM125G MH TPO 12 X 50' NON-REIN FLASHING GRAY Roll 1 17
08MHDM125T MH TPO 12 X 50' NON-REIN FLASHING TAN Roll 1 17
08MHDM125W MH TPO 12 X 50' NON-REIN FLASHING WHT Roll 1 17
08MHDM243G MH TPO 24 X 50 NON-REIN FLASHING GRAY Roll 1 33
08MHDM243T MH TPO 24 X 50 NON-REIN FLASHING TAN Roll 1 33
08MHDM243W MH TPO 24 X 50' NON-REIN FLASHING WHT Roll 1 33
08MHDM24MZ MH TPO 24 X 50' NON-REIN FLASHING MEDIUM BRONZE Roll 1 33
08MHDM24PG MH TPO 24 X 50' NON-REIN FLASHING PATINA GREEN Roll 1 33
08MHDM24RB MH TPO 24 X 50' NON-REIN FLASHING ROCK BROWN Roll 1 33
08MHDM24SG MH TPO 24 X 50' NON-REIN FLASHING SLATE GRAY Roll 1 33
08MHDM24TC MH TPO 24 X 50' NON-REIN FLASHING TERRA COTTA Roll 1 33

Videos