Skip to content
TPO Primer

TPO Primer

A solvent-based product designed for one-step cleaning and priming of TPO surfaces to be bonded with In-Seam Tapes, Uncured Flashing Tapes, Cured Cover Tapes, and Pre-Taped membranes. It is specially formulated using a blend of VOC exempt and non-exempt solvents to meet the < 250 g/L VOC content requirements of the OTC Model Rule for adhesives and sealants.

System

TPO
M&R
  • Used with TPO Pressures Sensitive products
  • Used to promote adhesion with Pourable Sealer
  • Meets ICC-ES Standards

Documents

PDS TPO Tape Primer
View
SDS TPO Tape Primer
View

Maintenance & Repair Brochure
View
OTC Regulation Update for Adhesives and Sealants
View
Single-Ply Roofing Accessories Guide
View

Details

BASE ATTACHMENT WITH 6 inch RUSS

2-PIECE OUTSIDE CORNER UNCURED EPDM
INSIDE CORNER - UNCURED EPDM

PARAPET/CURB FLASHING FOR EPDM

DUTCH GUTTER FOR EPDM AND TPO
INTERMITTENT WALL SCUPPER FOR EPDM

FM CORNER/PERIMETER FASTENING ENHANCEMENTS - TPO OPTION A
FM CORNER/PERIMETER FASTENING ENHANCEMENTS - TPO OPTION B
PERIMETER ATTACHMENT - OPTION 2 - 10 inch RUSS STRIP ALTERNATE FOR TPO
PERIMETER SECUREMENT - 10 inch RUSS STRIP FOR EPDM

FIELD FABRICATED PIPE FLASHING WITH SEAM TAPE FOR TPO
FIELD FABRICATED PIPE FLASHING WITH WHITE UNCURED EPDM
HOT PIPE FLASHING WITH COLD SLEEVE WITH UNCURED EPDM
LIGHTNING ROD DETAIL
LIGHTNING ROD WALL SUPPORT FOR TPO
PITCH PAN MEMBRANE COATED METAL FOR TPO
PRE-MOLDED PIPE BOOT - WHITE EPDM
TPO MOLDED SEALANT POCKET
WHITE EPDM PREFABRICATED SEALANT POCKET

DRIP EDGE - TPO PS COVER STRIP

MEMBRANE / SEAM REPAIR WHITE MATE-LINE TAPE
METAL RETROFIT - 10 inch RUSS RIDGE SECUREMENT DETAIL FOR TPO
METAL RETROFIT - 10 inch RUSS STRIP MEMBRANE SECUREMENT FOR TPO
METAL RETROFIT - 100 MPH OR LESS WIND ZONES MECHANICALLY ATTACHED SYSTEM FOR TPO - OPTION 1
METAL RETROFIT - 100 MPH OR LESS WIND ZONES MECHANICALLY ATTACHED SYSTEM FOR TPO - OPTION 2
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 1
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 2
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 3
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 4
UNCURED EPDM SEAM PATCH AT FIELD / WALL TRANSITION
WHITE UNCURED EPDM "T" JOINT COVER .060" (60 MIL) OR THICKER MEMBRANE

TIE-IN TO EXISTING EPDM OR HYPALON - TEAR-OFF SITUATION FOR TPO

VALLEY FLASHING - 6 inch RUSS FOR TPO - OPTION 2
VALLEY FLASHING 6 inch RUSS FOR TPO - OPTION 1

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
08MHTMP1 MH TPO PRIMER 6/CTN Metal Pail 6 40 250 sq.ft. per gallon

Videos

FAQs

This product does not comply with the following Utah counties’ VOC regulations: Box Elder, Cache, Davis, Salt Lake, Tooele, Utah, and Weber.