Skip to content
Uncured Flashing Tape (White & Black)

Uncured Flashing Tape (White & Black)

May be used in conjunction with the Mule-Hide Tape Primer to flash inside and outside corners, pipes, pitch pockets or other penetrations that require the flashing to be molded or conform to an irregular shape. Not permitted for use in flashing gravel stops, drip aprons or stripping seams or batten bars. This product requires the use of Tape Primer or Low-VOC Tape Primer.

System

EPDM
TPO
M&R
  • Used as formable flashing on pipes, corners, etc.
  • Used as T-Joint patches and tie-ins
  • 90 Mil thickness
  • Available in multiple lengths, widths and in black or white colors
  • Must be installed with Tape Primer and Lap Sealant/Universal Single Ply Sealant
  • White can be used on TPO products
  • Not to be used to strip in metal
  • Meets ICC-ES Standards

Documents

PDS Uncured EPDM Systems Flashing Tape-Black
View
PDS Uncured EPDM Systems Flashing Tape-White
View
SDS - Statement for Article Products
View

Maintenance & Repair Brochure
View
Single-Ply Roofing Accessories Guide
View

Details

2-PIECE INSIDE CORNER WALL FLASHING FOR EPDM
EPDM OUTSIDE CORNER - ONE PIECE WRAP
EPDM OUTSIDE CORNER - TWO PIECE
INSIDE CORNER WITH CONTINUOUS EPDM WALL FLASHING - 90 MIL EPDM
View
INSIDE CORNER WITH SEPARATE EPDM WALL FLASHING - 90 MIL EPDM
View
OUTSIDE CORNER WITH UNCURED FLASHING TAPE - 90 MIL EPDM
View

CURB FLASHING - 90 MIL EPDM
View
MULTIPLE PENETRATIONS CURB DETAIL - 90 MIL EPDM
View
PARAPET/CURB FLASHING FOR EPDM
PARAPET/CURB WITH SEPARATE EPDM MEMBRANE - 90 MIL EPDM
View
WELDED CURB OVER FIELD MEMBRANE WITH CURED OR UNCURED FLASHING TAPE

INTERMITTENT WALL SCUPPER FOR EPDM
NEW METAL THROUGH-WALL SCUPPER WITH WHITE UNCURED EPDM FOR TPO

EXPANSION JOINT - EXISTING FIELD JOINT - A FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT - B FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT "A"
EXPANSION JOINT - EXISTING FIELD JOINT "B"
EXPANSION JOINT - FIELD JOINT
EXPANSION JOINT - FIELD JOINT FOR EPDM

PERIMETER ENHANCEMENT FULL SHEET WITH 9 inch RMS FOR EPDM
PERIMETER SHEET ATTACHMENT FOR EPDM

FIELD FABRICATED HOT STACK - 90 MIL EPDM
View
FIELD FABRICATED PIPE SEAL - 90 MIL EPDM
View
FLEXIBLE PENETRATION - 90 MIL EPDM
View
MOLDED PIPE FLASHING WITH TAPE - 90 MIL EPDM
View
POURABLE SEALER POCKET DOUBLE APPLICATION - 90 MIL EPDM
View
POURABLE SEALER POCKET WITH RAIN HOOD - 90 MIL EPDM
View
PRE-FABRICATED METAL PITCH PAN FOR EPDM
PREMOLDED EPDM PIPE BOOT WITH TAPE - MECHANICALLY ATTACHED

PREMANUFACTURED 2-PIECE COMPRESSION LARGE EDGE DETAIL FOR EPDM - OPTION 2

END LAP AND T-JOINT DETAIL FOR EPDM
WALL FLASHING WITH CONTINUOUS MEMBRANE - 90 MIL EPDM
View

EPDM TIE-IN HOT STRIPPING
EPDM TIE-IN TO BUILT-UP ROOF - ADHESIVE
EPDM TIE-IN TO BUILT-UP ROOF - IN-SEAM TAPE
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - ADHESIVE
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - IN-SEAM TAPE

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
08MHUT061B MH 6X100 BLK UNCURED FLSHG TP 2/CTN Roll 2 59
08MHUT062B MH 6X 25' UNCURED FLASHING TAPE BLK 8/CT Roll 8 61
08MHUT095B MH 9X50 BLACK UNCURED FLSHG TP 1/CTN Roll 1 24
08MHUT095W MH 9X50 WHITE UNCURED FLSHG TP 1/CTN Roll 1 24
08MHUT125B MH 12X50' BLK UNCURED FLSHG TAPE Roll 1 30
08MHUT125W MH 12X50 WHITE UNCURED FLSHG TP 1/CTN Roll 1 32
08MHUT061G MH 6X100  UNCURED FLSHG TP GRAY 2/CTN Roll 2 59
08MHUT095G MH 9X50 UNCURED FLSHG TP GRAY 1/CTN Roll 1 24
08MHUT125G MH 12X50 UNCURED FLSHG TP GRAY 1/CTN Roll 1 30
08MHUT061W MH 6" X 100' UNCURED FLASHING TAPE WHITE 2/CTN Roll 2 0 100 LF

Videos