Shur-Gard TU Force HT

Shur-Gard TU Force HT

NEW-PRODUCT

Shur-Gard TU Force HT

Shur-Gard TU Force HT consists of a dual SBS polymer formulation and a non-woven polyester top surface. It is reinforeced with a flexible fiberglass mat for exceptional tensile strength and thermal stability and easy conformation to valleys, corners, and angles. Temperature resistant to 265°F.

FIND A DISTRIBUTOR

Features & Benefits

  • Ideal for adhesive-bonded and mechanically attached concrete and clay tiles. Its reinforced fiberglass mat with a polyester non-woven top surface provides excellent bonding and material strength.
  • Strong and robust material – this 80-mil product seals better around screws (fasteners) and holds up to traffic
  • 180-day UV exposure – longer dry-in time and greater protection from temporary exposure
  • Factory-applied, split-release film that is easily removed for quick, hassle-free installation.
  • 3-inch adhesive selvedge edge improves overlap bonding and makes installation fast and easy.
  • Meets  UL Standards
  • Meets  Miami-Dade-County Standards
  • Meets  Florida-Building Standards

Documents

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
11MHSTFHT2 Shur-Gard TU Force HT Shrink Wrapped Plastic Bag 68 200 sq ft

FAQ

It is primarily a matter of the contractor’s or property manager’s personal preference. The two products have similar performance characteristics.
Shur-Gard TU Force HT have a UV exposure rating of 180 days.
No. Because Shur-Gard TU Force HT is reinforced, it does not have the flexibility required for flashing details.
Yes, the two products can be used in conjunction with each other, provided the joints are fully adhered.
Shur-Gard TU Force HT should only be installed when material interface temperatures are 40ºF and rising. Lower temperatures will result in lower tack and will reduce adhesion.
If low temperatures are present during installation, the underlayments may be back nailed to hold them in position during installation. As temperatures rise, the adhesive will activate and bond with the substrate and seams.
Priming is not necessary when adhering the underlayments to clean, dry roof decks made of wood. Concrete and masonry deck surfaces require priming with asphalt primer that meets ASTM D41 standards.
Rolls of Shur-Gard TU Force HT should be stored in their factory-applied packaging in a dry, protected warehouse at a temperature not exceeding 110ºF.
Shur-Gard TU Force HT are backed by Mule-Hide Products Co.’s standard one-year materials-only warranty.