Skip to content
TPO 60 Mil Non-Reinforced Flashing

TPO 60 Mil Non-Reinforced Flashing

Primarily used to seal details where field fabrication is necessary, such as drain details, pipe flashings, pitch pocket flashings, seaming joints of the MuleHide TPO Coated Metal and any place where reinforced membrane is not practical.

Colors

System

TPO
  • Used as formable flashing on pipes, corners, etc.
  • Used as T-Joint patches and tie-ins
  • 60 Mil thickness
  • Available in 12" and 24" widths
  • Available in multiple colors
  • Must be pre-heated and pre-stretched prior to installation
  • Meets ICC-ES Standards

Documents

PDS TPO 60 Mil Non-Reinforced Flashing
View
SDS - Statement for Article Products
View

Maintenance & Repair Brochure
View
Single-Ply Roofing Accessories Guide
View

Details

FIELD FABRICATED INSIDE CORNER FOR TPO
FIELD FABRICATED OUTSIDE CORNER FOR TPO
INSIDE CORNER FOR TPO
INSIDE CORNER USING RUSS FOR TPO

PARAPET/CURB FLASHING FOR EPDM

GRAVEL STOP SCUPPER - TPO COATED METAL
INTERMITTENT WALL SCUPPER FOR EPDM
THROUGH-WALL SCUPPER - TPO COATED METAL
THROUGH-WALL SCUPPER - TPO COATED METAL

FIELD FABRICATED PIPE FLASHING WITH BANDING CLAMP FOR TPO
FIELD FABRICATED PIPE FLASHING WITH SEAM TAPE FOR TPO
HOT PIPE FLASHING WITH COLD SLEEVE FOR TPO
I-BEAM SUPPORT FLASHING FOR TPO
MULTIPLE PIPE PENETRATION FOR TPO
PITCH PAN MEMBRANE COATED METAL FOR TPO
TPO MOLDED SEALANT POCKET

METAL RETROFIT - MEMBRANE COATED DRIP EDGE WITH GUTTER FOR TPO
PREMANUFACTURED MEMBRANE COATED METAL PITCH PAN FOR TPO

METAL RETROFIT - 10 inch RUSS RIDGE SECUREMENT DETAIL FOR TPO
METAL RETROFIT - 100 MPH OR LESS WIDE SHEETS WITH SEAMS OVER PURLINS FOR TPO
METAL RETROFIT - 100 MPH OR LESS WIND ZONES MECHANICALLY ATTACHED SYSTEM FOR TPO - OPTION 1
METAL RETROFIT - 100 MPH OR LESS WIND ZONES MECHANICALLY ATTACHED SYSTEM FOR TPO - OPTION 2
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 1
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 2
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 3
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 4
METAL RETROFIT - 101-120 MHP WIND ZONES NARROW SHEETS WITH SEAMS OVER PURLINS
METAL RETROFIT - SEAM FASTENING NARROW ROLLS MEMBRANE SECUREMENT FOR TPO
SEAM PATCH AT FIELD/WALL TRANSITION FOR TPO
T-JOINT COVER - 60 MIL OR THICKER MEMBRANES FOR TPO

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
08MHDM125G MH TPO 12 X 50' NON-REIN FLASHING GRAY Roll 1 17
08MHDM125T MH TPO 12 X 50' NON-REIN FLASHING TAN Roll 1 17
08MHDM125W MH TPO 12 X 50' NON-REIN FLASHING WHT Roll 1 17
08MHDM243G MH TPO 24 X 50 NON-REIN FLASHING GRAY Roll 1 33
08MHDM243T MH TPO 24 X 50 NON-REIN FLASHING TAN Roll 1 33
08MHDM243W MH TPO 24 X 50' NON-REIN FLASHING WHT Roll 1 33
08MHDM24MZ MH TPO 24 X 50' NON-REIN FLASHING MEDIUM BRONZE Roll 1 33
08MHDM24PG MH TPO 24 X 50' NON-REIN FLASHING PATINA GREEN Roll 1 33
08MHDM24RB MH TPO 24 X 50' NON-REIN FLASHING ROCK BROWN Roll 1 33
08MHDM24SG MH TPO 24 X 50' NON-REIN FLASHING SLATE GRAY Roll 1 33
08MHDM24TC MH TPO 24 X 50' NON-REIN FLASHING TERRA COTTA Roll 1 33

Videos