Skip to content
TPO Colorway

TPO Colorway

Used in mechanically attached and fully adhered roofing systems in new construction, reroofing and recover (retrofit) applications. It may also be used as flexible membrane flashings for walls, curbs, etc, when installing TPO membrane roofing systems. The system must be installed over acceptable roof insulation or other suitable substrate. See the MuleHide TPO Specifications Manual for complete specifications and details

TPO Colorway is also available in the following accessories:

 

Colors

System

TPO
  • Polyester-reinforced
  • Available in 5' and 10' widths by 100' length
  • 60 and 80 mil thickness
  • Fully adhered, mechanically attached and ballasted systems
  • Available in medium bronze, patina green, rock brown, slate gray, and terra cotta
  • Most often installed as mechanically attached
  • Up to a 20 year system warranty available
  • All adhesives must be installed as a 2-sided contact adhesive
  • Pre-printed with lap lines and fastener spacing
  • Meets  UL Standards
  • Meets  C-UL Standards
  • Meets  FM Standards
  • Meets  CCMC Standards
  • Meets  Miami-Dade-County Standards
  • Meets  Florida-Building Standards
  • Meets  ICC-ES Standards

Documents

PDS - Standard TPO Membranes
PDS - TPO Systems-c Extra Membrane
SDS - Statement for Article Products
TPO Universal Corner Flashing

All TPO Installation Videos
Eight Reasons to Choose a TPO System
MuleHide Company Brochure
Single-Ply Roofing Accessories Guide
TPO Metal Retrofit
TPO Systems Brochure

Design Enhancements - Single-Ply Membranes

Details

TPO Outside Corner: 9" x 9" Pre-Cut White or Gray EPDM PS Uncured Flashing
TPO Parapet Inside Corner Wall Flashing: Step by Step with Separate Wall Flashing
TPO Pre-Molded Outside Corner Flashing

TPO Curb Flashing with TPO Membrane
TPO Curb Flashing: Prefabricated Curb Wrap Corners
TPO Curb: White or Gray EPDM PS Curb Wrap with 20" Tape
TPO Field Fabricated Outside Corner Flashing
TPO Outside Corner: 7" x 9" Pre-Cut White or Gray EPDM Inside/Outside Corners
TPO Self-Flashing Curb: Curb Flange Set on Top of Field Membrane

TPO Roof Deck to Curb Wall Expansion Joint
TPO Roof Deck to Roof Deck Expansion Joint
TPO Roof Deck to Wall Expansion Joint

TPO Sleeper
TPO: lightning Rod on Deck Membrane

TPO Cur or Wall Base Attachment with AP Bar: "Vertical" Attachment
TPO Curb or Wall Base Attachment
TPO Curb or Wall Base Attachment with AP Bar
TPO Curb or Wall Base Attachment: "Vertical" Attachment
TPO FB Curb or Wall Base Attachment with Low-Rise: Separate Wall Flashing
TPO IW Plates for Curb or Wall Base Attachment
TPO IW Plates for Wall Attachment
TPO T-Joint Intersection and Field to Wall Transition
TPO T-Joint Intersection and Field to Wall Transition; White or Gray EPDM PS Uncured Flashing
TPO Wall Base Attachment with 6" TPO PS Russ
TPO Wall Base Attachment with 6" TPO PS Russ: "Vertical" Attachment

TPO Induction Welded System Layout (20 Year)
TPO Induction Welded System Layout (25/30 Year)
TPO MA Metal Retrofit: 10" Russ Purlin Attachment
TPO MA Metal Retrofit: Induction Weld Purlin Attachment
TPO MA Metal Retrofit: In-Seam Purlin Attachment
TPO Mechanically Attached System Perimeter Zones
TPO: "Fingers" for Perimeter Sheets
TPO: 10" Russ "Fingers" for Perimeter Sheets
TPO: 10" Russ Picture Frame Method for Perimeter Sheets
TPO: IW Plate "Fingers" for Perimeter Sheets
TPO: IW Plate Picture Frame Method for Perimeter Sheets
TPO: Picture Frame Method for Perimeter Sheets

TPO Non-Vented Ridge Attachment: Adhered System Metal Retrofit
TPO Non-Vented Ridge Attachment: MA Metal Retrofit Purlin Attachment
TPO Ridge Membrane Attachments: Mech-Attached Systems with Slopes Exceeding 3",12"
TPO Vented Ridge Attachment: All TPO Metal Retrofit Assembles

TPO Metal Retrofit: Eave Condition and Options with Gutter
TPO Metal Retrofit: Nailer-T with Pitched Flange and 1-3/4" Fascia Cover Bar (Without Gutter)
TPO Metal Retrofit: Nailer-T With Pitched Flange and AP Bar (With Gutter)
TPO: MuleHide (KYNAR) Drip Edge Flashed with TPO PS Cover Strip
TPO: MuleHide (KYNAR) Drip Edge Flashed with White or Gray EPDM PS Cured Cover Tape
TPO: MuleHide (KYNAR) Gravel Stop Flashed with TPO PS Cover Strip
TPO: MuleHide (KYNAR) Gravel Stop Flashed with White or Gray EPDM PS Cured Cover Tape
TPO: MuleHide 2-Piece Snap on Compression Edge Metal
TPO: MuleHide Aluminum Bar with 1-3/4" Fascia Cover
TPO: MuleHide AP Bar at Gutter
TPO: MuleHide Coping Edge Metal
TPO: MuleHide Drip Edge at Gutter
TPO: MuleHide EclipseEdge or Extruded Fascia Edge Metal
TPO: MuleHide Gutter with Flange Flashed with TPO PS Cover Strip
TPO: MuleHide Gutter with Flange Flashed with White or Gray EPDM PS Cured Cover Tape
TPO: MuleHide TPO Coated Drip Edge
TPO: MuleHide TPO Skirted Drip Edge

TPO: Pre-Fabricated TPO Coated Metal Thru-Wall Scupper
TPO: Thru-Wall Scupper Flashed With White or Gray EPDM Uncured Flashing
TPO: TPO Coated Metal Thru-Wall Scupper - Field Flashed with All Hot Air Welds
TPO: TPO Coated Metal Thru-Wall Scupper - Field Flashed with White or Gray Pressure Sensitive Corners

TPO Field Seam
TPO Mechanically Attached Field Seam
TPO T-Joint Intersection
TPO T-Joint Intersection - Mechanically Attached

TPO Parapet Termination with Clay Coping Cap
TPO Parapet Termination with Masonry Coping Cap

TPO: Curb Wall Tie-in Wall Parallel to Slope - Any Deck Type
TPO: Hot Tie-In to Bur/Mod Bit Over Solid Deck
TPO: Hot Tie-In to Bur/Mod Bit Over Steel Deck
TPO: Tie-In to Steep Slope Shingled or Metal Panel Roof
TPO: Tie-In to TPO or EPDM Over Solid Deck
TPO: Tie-In to TPO or EPDM Over Steel Deck
TPO: Weep Holes at Steel Deck Tie-Ins when MH System is Down Slope

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
07MHT651MZ MH TPO COLORWAY 060 5 X 100 MEMBRANE MED BRONZE Shrink Wrap 2 330 500 Sq.Ft/RL
07MHT611MZ MH TPO COLORWAY 060 10 X 100 MEMBRANE MED BRONZE Shrink Wrap 1 330 1000 Sq.Ft/RL
07MHT651PG MH TPO COLORWAY 060 5 X 100 MEMBRANE PATINA GRN Shrink Wrap 2 330 500 Sq.Ft/RL
07MHT611PG MH TPO COLORWAY 060 10 X 100 MEMBRANE PATINA GRN Shrink Wrap 1 330 1000 Sq.Ft/RL
07MHT651RB MH TPO COLORWAY 060 5 X 100 MEMBRANE ROCK BROWN Shrink Wrap 2 330 500 Sq.Ft/RL
07MHT611RB MH TPO COLORWAY 060 10 X 100 MEMBRANE ROCK BROWN Shrink Wrap 1 330 1000 Sq.Ft/RL
07MHT651SG MH TPO COLORWAY 060 5 X 100 MEMBRANE SLATE GRAY Shrink Wrap 2 330 500 Sq.Ft/RL
07MHT611SG MH TPO COLORWAY 060 10 X 100 MEMBRANE SLATE GRAY Shrink Wrap 1 330 1000 Sq.Ft/RL
07MHT651TE MH TPO COLORWAY 060 5 X 100 MEMBRANE TERRA COTTA Shrink Wrap 2 330 500 Sq.Ft/RL
07MHT611TE MH TPO COLORWAY 060 10 X 100 MEMBRANE TERRA COTTA Shrink Wrap 1 330 1000 Sq.Ft/RL
07MHT851MZ MH TPO COLORWAY 080 5 X 100 MEMBRANE MED BRONZE Shrink Wrap 2 426 500 Sq.Ft/RL
07MHT811MZ MH TPO COLORWAY 080 10 X 100 MEMBRANE MED BRONZE Shrink Wrap 1 426 1000 Sq.Ft/RL
07MHT851PG MH TPO COLORWAY 080 5 X 100 MEMBRANE PATINA GRN Shrink Wrap 2 426 500 Sq.Ft./RL
07MHT811PG MH TPO COLORWAY 080 10 X 100 MEMBRANE PATINA GRN Shrink Wrap 1 426 1000 Sq.Ft/RL
07MHT851RB MH TPO COLORWAY 080 5 X 100 MEMBRANE ROCK BROWN Shrink Wrap 2 426 500 Sq.Ft/RL
07MHT811RB MH TPO COLORWAY 080 10 X 100 MEMBRANE ROCK BROWN Shrink Wrap 1 426 1000 Sq.Ft/RL
07MHT851SG MH TPO COLORWAY 080 5 X 100 MEMBRANE SLATE GRAY Shrink Wrap 2 426 500 Sq.Ft/RL
07MHT811SG MH TPO COLORWAY 080 10 X 100 MEMBRANE SLATE GRAY Shrink Wrap 1 426 1000 Sq.Ft/RL
07MHT851TE MH TPO COLORWAY 080 5 X 100 MEMBRANE TERRA COTTA Shrink Wrap 1 426 500 Sq.Ft/RL
07MHT811TE MH TPO COLORWAY 080 10 X 100 MEMBRANE TERRA COTTA Shrink Wrap 1 426 1000 Sq.Ft/RL

FAQs

Fees vary depending on the type of warranty desired. Current Fees are listed on Mule-Hide Warranty Application forms.

Walkway Rolls are always recommended. Mule-Hide offers walk pads for each system/membrane type we sell.

No, this is not required, but all areas of wet insulation must be replaced with new, dry, similar material, specific warranties may require an independent moisture scan of the roof.

Yes, Mule-Hide Territory Managers offer these services.

Just provide Mule-Hide with the following information: A copy of the specification Name & address to whom the letter should be addressed Your phone & fax number What is the UL/FM requirement? Deck type? Slope? Insulation type and thickness? Membrane and system? Building location and height? Overall dimensions? Parapet height?

To reduce blocking, packs should only be stacked 4-packs up to five high. We have found that when stacked higher, the bottom rolls could crush a bit which could create blocking and a wavy sheet when installed. It is possible that the stacking issue can be heightened over the summer months due to the heat.