Skip to content
White-on-Black EPDM

White-on-Black EPDM

Our White-on-Black 60-mil and 90-mil EPDM membranes are used primarily in fully adhered roofing systems on new construction, reroofing and recover (retrofit) applications. The 60-mil membrane may also be used as flexible membrane flashings for walls, curbs, etc, when installing an EPDM membrane roofing systems. The system must be installed over acceptable roof insulation or other suitable substrate. See our MuleHide Specifications Manual for complete specifications and details.

System

EPDM
  • Non-reinforced
  • Multiple widths and lengths
  • 60, 90 mil thickness, 90 mil requires a lead-time
  • Fully adhered and ballasted systems only
  • Fire-rated
  • Increased Fire-rated sheet available
  • Most often installed as fully adhered
  • Up to a 30 year system warranty available
  • Approved for use with Mule-Hide Acrylic Water Base Bonding Adhesive for up to a 20 year system warranty
  • Pre-Taped with 3" or 6" tape available
  • Meets UL Standards
  • Meets C-UL Standards
  • Meets FM Standards
  • Meets CCMC Standards
  • Meets CRRC Standards
  • Meets CA-Title-24 Standards
  • Meets ICC-ES Standards

Documents

PDS EPDM Systems White-on-Black EPDM 45 mil
View
PDS EPDM Systems White-on-Black Membrane 60 and 90 mil
View
SDS - Statement for Article Products
View
TIE-IN EXISTING EPDM OR HYPALON TEAR-OFF SITUATION
View

CCMC - Canadian Construction Materials Centre evaluation for EPDM Systems
View
Florida Product Approval - EPDM Systems
View
Florida Product Approval HVHZ - EPDM Systems
View
ICC-ESR Report - Adhered and Mech. Attached EPDM Systems, TPO Systems & PVC Systems
View
ICC-ESR Report - Ballasted EPDM Systems and TPO Systems
View
UL - Impact resistance ratings for EPDM Systems
View
UL - Overview of UL Listings for EPDM Systems
View
UL - Summary of UL Listings for EPDM Systems
View

All EPDM Installation Videos
View
EPDM Cross Reference Chart
View
EPDM Pocket Guide
View
EPDM Pocket Guide (Spanish)
View
EPDM Systems Contractor Brochure
View
Hail Coverage - Procedures and Requirements
View
Letter of Compliance Application- Photovoltaic Installation on Mule-Hide Warranted Roof
View
Modular Roofing Systems Brochure
View
Procedure for Inclusion of Photovoltaic Anchor Flashings
View
Reduced Fastener Requirements for Uplift Ratings
View
Single-Ply Roofing Accessories Guide
View
Talking Points - 20-Year EPDM Warranty
View
Talking Points - EPDM X-23
View
Tech Bulletin - Pactiv GreenGuard Insulation
View

Design Enhancements - Single-Ply Membranes
View
Design Summary - EPDM Systems 10 or 15 year Ballasted
View
Design Summary - EPDM Systems 10 or 15 year Fully Adhered
View
Design Summary - EPDM Systems 10 or 15 year Mechanically Attached
View
E-Z Residential (Single-Family) Warranty Application - Material Only
View
Warranty - Contractor Eligibility Procedure
View
Warranty - Notice of Completion
View
Warranty Program Information - EPDM Systems
View

Details

6 inch RMS ATTACHMENT STRIP
6 inch RMS WITH TAPE
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/6 inch IN-SEAM TAPE
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/ADHESIVE
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/COVER TAPE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/3 inch IN-SEAM TAPE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/6 inch IN-SEAM TAPE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/ADHESIVE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/COVER TAPE
PARAPET/CURB FLASHING BAR HORIZONTAL ATTACHMENT W/3 inch IN-SEAM TAPE
PARAPET/CURB FLASHING RMS W/TAPE - HORIZONTAL
PARAPET/CURB FLASHING RMS W/TAPE - HORIZONTAL
PARAPET/CURB FLASHING RMS W/TAPE - VERTICAL

2-PIECE INSIDE CORNER WALL FLASHING FOR EPDM
EPDM OUTSIDE CORNER - ONE PIECE WRAP
EPDM OUTSIDE CORNER - TWO PIECE
INSIDE CORNER WITH CONTINUOUS EPDM WALL FLASHING - 90 MIL EPDM
View
INSIDE CORNER WITH SEPARATE EPDM WALL FLASHING - 90 MIL EPDM
View
OUTSIDE CORNER WITH UNCURED FLASHING TAPE - 90 MIL EPDM
View

CURB FLASHING - 90 MIL EPDM
View
MULTIPLE PENETRATIONS CURB DETAIL - 90 MIL EPDM
View
PARAPET/CURB WITH SEPARATE EPDM MEMBRANE - 90 MIL EPDM
View
SLEEPER FOR EPDM
WELDED CURB FLASHING
WELDED CURB FLASHING - ALL PURPOSE BAR TERMINATION FOR EPDM
WELDED CURB FLASHING - AP BAR TERMINATION
WELDED CURB FLASHING - HIGH CURB FOR EPDM
WELDED CURB FLASHING FOR EPDM
WELDED CURB OVER FIELD MEMBRANE WITH CURED OR UNCURED FLASHING TAPE
WELDED CURB OVER FIELD MEMBRANE WITH SEAM TAPE
WELDED CURB OVER FIELD MEMBRANE WITH SEAM TAPE FOR EPDM
WOOD CURB OVER FIELD MEMBARNE WITH SEAM TAPE
WOOD CURB WITH ALL PURPOSE BAR AND SEAM TAPE
WOOD CURB WITH ALL PURPOSE BAR AND SEAM TAPE FOR EPDM

DRAIN INSERT FOR EPDM
PREMANUFACTURED CONDUCTOR HEAD
ROOF DRAIN FOR EPDM
ROOF DRAIN WITH TAPERED INSULATION FOR EPDM

12 inch SELF-BRIDGING MATE-LINE
9 inch SELF-BRIDGING MATE-LINE
DECK TO WALL JOINT - A - RMS STRIP - ADHESIVE
EXPANSION JOINT - DECK TO WALL JOINT
EXPANSION JOINT - DECK TO WALL JOINT - A FOR EPDM
EXPANSION JOINT - DECK TO WALL JOINT - C - ADHESIVE FOR EPDM
EXPANSION JOINT - DECK TO WALL JOINT - C - IN-SEAM TAPE FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT - A FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT - B FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT "A"
EXPANSION JOINT - EXISTING FIELD JOINT "B"
EXPANSION JOINT - FIELD JOINT
EXPANSION JOINT - FIELD JOINT - RMS
EXPANSION JOINT - FIELD JOINT - RMS FOR EPDM
EXPANSION JOINT - FIELD JOINT FOR EPDM
EXPANSION JOINT CURB/FIREWALL - ADHESIVE
EXPANSION JOINT CURB/FIREWALL - IN-SEAM TAPE
MATE-LINE WITH COVER TAPE
MATE-LINE WITH COVER TAPE - WOOD BRIDGING MATERIAL
RAISED MATE-LINE
RAISED MATE-LINE

CORNER FOLD DETAIL FOR EPDM

2 inch OR THICKER INSULATION ATTACHMENT - 8 FASTENERS PER 4ft X 8ft BOARD
FM - 10 Field Fasteners per 4'x8' Board
FM - 12 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 16 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 17 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 6 Field Fasteners per 4'x8' Board
FM - 8 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 8 Field Fasteners per 4'x8' Board
HELIX MAX FOAM ADHESIVE 12" RIBBON PATTERN
HELIX MAX FOAM ADHESIVE 4" RIBBON PATTERN
HELIX MAX FOAM ADHESIVE 6" RIBBON PATTERN
INSULATION ATTACHMENT - 12 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT - 16 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT - 17 FASTENERS PER 4ft X 8ft IN FIELD

FIELD FABRICATED HOT PIPE - ADHESIVE FOR EPDM
FIELD FABRICATED HOT STACK - 90 MIL EPDM
View
FIELD FABRICATED PIPE FLASHING - ADHESIVE
FIELD FABRICATED PIPE SEAL - 90 MIL EPDM
View
FIELD FABRICATED PITCH PAN - ADHESIVE
FLEXIBLE PENETRATION - 90 MIL EPDM
View
LIGHTNING ROD - HORIZONTAL ATTACHMENT FOR EPDM
LIGHTNING ROD - VERTICAL ATTACHMENT FOR EPDM
MOLDED PIPE FLASHING WITH TAPE - 90 MIL EPDM
View
POURABLE SEALER POCKET DOUBLE APPLICATION - 90 MIL EPDM
View
POURABLE SEALER POCKET FOR EPDM
POURABLE SEALER POCKET WITH RAIN HOOD - 90 MIL EPDM
View
PRE-FABRICATED METAL PITCH PAN FOR EPDM
PREMOLDED EPDM PIPE BOOT WITH TAPE

ALL PURPOSE BAR TERMINATION - 90 MIL EPDM
View
ALL PURPOSE BAR TERMINATION for EPDM
ALL PURPOSE BAR TERMINATION WITH FASCIA BOARD
ALL PURPOSE BAR TERMINATION Z-CLIP CAP
ALL PURPOSE BAR TERMINATION Z-CLIP CAP W/VINYL SIDING
Batten Bar with Cover Strip
DRIP APRON / GUTTER TERMINATION EPDM
DRIP APRON TERMINATION FOR EPDM
DRIP EDGE - 90 MIL EPDM
View
DRIP EDGE AT MANSARD FOR EPDM
EDGE TERMINATION - ALL-PURPOSE BAR FOR EPDM
EDGE TERMINATION BAR WITH COVER FOR EPDM
EDGE TERMINATION BAR WITH COVER FOR EPDM - OPTION 2
EDGE TERMINATION J-CHANNEL FOR EPDM
EDGE TERMINATION J-CHANNEL FOR EPDM - OPTION 2
GRAVEL STOP TERMINATION FOR EPDM
GRAVEL STOP WITH SCUPPER FOR EPDM
GRAVEL STOP WITH SNAP LOCK FASCIA FOR EPDM
GUTTER WITH METAL FASCIA AND ALL PURPOSE BAR FOR EPDM
J-CHANNEL TERMINATION WITH FASCIA BOARD FOR EPDM - OPTION 1
J-CHANNEL TERMINATION WITH FASCIA BOARD FOR EPDM - OPTION 2
METAL ERA ANCHOR-TITE EDGE DETAIL - 90 MIL EPDM
View
PERIMETER EDGE WITH FASCIA BOARD FOR EPDM
PREMANUFACTURED 2-PIECE COMPRESSION LARGE EDGE DETAIL FOR EPDM - OPTION 2
PREMANUFACTURED ARCHED DRIP EDGE W/SPLICE CLEAT FOR EPDM

END LAP AND T-JOINT DETAIL FOR EPDM
MEMBRANE SPLICE W/3 inch IN-SEAM TAPE
MEMBRANE SPLICE W/6 inch IN-SEAM TAPE
MEMBRANE SPLICE W/SPLICE ADHESIVE - 6 inch SEAM
MEMBRANE SPLICE WITH IN-SEAM TAPE - 3 inch SEAM
MEMBRANE SPLICE WITH IN-SEAM TAPE - 90 MIL
View
MEMBRANE SPLICE WITH SPLICE ADHESIVE - 3 inch SEAM
VERTICAL TERMINATION - 90 MIL EPDM
View
WALL FLASHING WITH CONTINUOUS MEMBRANE - 90 MIL EPDM
View

MODULAR EPDM Mate-Line- Cover Tape
PREMANUFACTURED ARCHED COPING WITH SPLICE PLATE
PREMANUFACTURED METAL EDGE EXTENDER
PREMANUFACTURED REGLET COUNTERFLASHING
PREMANUFACTURED SURFACE MOUNTED COUNTERFLASHING
VERTICAL TERMINATION COUNTERFLASHING FOR EPDM
VERTICAL TERMINATION COUNTERFLASHING W/A-P BAR FOR EPDM
VERTICAL TERMINATION METAL COPING FOR EPDM
VERTICAL TERMINATION REGLET FOR EPDM
VERTICAL TERMINATION STONE COPING FOR EPDM
VERTICAL TERMINATION WITH A-P BAR FOR EPDM

EPDM BASE TIE-IN TO SHINGLE ROOF ALL PURPOSE BAR ATTACHMENT FOR EPDM
EPDM BASE TIE-IN TO SHINGLE ROOF W/RMS ATTACHMENT FOR EPDM
EPDM BASE TIE-IN TO SHINGLE ROOF W/RMS ATTACHMENT FOR EPDM - OPTION 2
EPDM TIE-IN HOT STRIPPING
EPDM TIE-IN TO BUILT-UP ROOF - ADHESIVE
EPDM TIE-IN TO BUILT-UP ROOF - IN-SEAM TAPE
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - ADHESIVE
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - IN-SEAM TAPE

RIDGE ATTACHMENT WITH RMS FOR EPDM

Specifications

Summary Specification - EPDM Ballasted
View

Specification - EPDM Systems Fully Adhered
View
Specification Supplement - AeroWeb Adhesive
View
Summary Specification - EPDM Systems Fully Adhered
View

Guide - EPDM Systems and Acrylic water base bonding adhesive
View
Guide - EPDM Systems and Solvent Base Bonding Adhesive
View
Guide - EPDM Systems Design Guidelines
View
Guide - EPDM Systems Flashing and Adhesive Guidelines
View
Guide - Insulation Guidelines
View
Guide - Roof Mounted Photovoltaic Installations
View
Single-Ply Insulation Attachment Guidelines
View
Tech Note - Design Wind Speed vs Warranted Wind Speed
View
Tech Note - Sheet Flutter on Mechanically Attached Systems
View

Summary Specification - EPDM Systems Mechanically Attached
View
System Specification - EPDM Systems Mechanically Attached
View

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
07MH610X1W MH EPDM 060 10'X100'WHT/BLK Plastic Bag 1 412 1000 Sq.Ft/RL
07MH610X5W MH EPDM 060 10'X50' WHITE/BLK Plastic Bag 1 222 500 Sq.Ft/RL
07MH61651W MH EPDM 060 16.5' X 100' WHT/BLK Plastic Bag 1 697 1650 Sq.Ft/RL
07MH61652W MH EPDM 060 16.5' X 200' WHT/BLK Plastic Bag 1 1396 3300 Sq.Ft/RL
07MH620X1W MH EPDM 060 20' X 100' WHT/BLK Plastic Bag 1 830 2000 Sq.Ft/RL
07MH620X5W MH EPDM 60 MIL 20' X 50' WHT/BLK Plastic Bag 1 415 1000 Sq.Ft/RL
07MH910X1W MH EPDM 090 10'X100' WHITE/BLACK Plastic Bag 1 634 1000 Sq.Ft/RL
07MHA61W3R MH 060 EPDM WHITE 10X100 w/3"TAPE Plastic Bag 1 396 1000 Sq.Ft/RL
07MHA616W3 MH 060 EPDM WHITE 16.5X100 w/3" TAPE Plastic Bag 1 698 1000 Sq.Ft/RL
07MHA620W3 MH 060 EPDM WHITE 20X100 w/3"TAPE Plastic Bag 1 846 2000 Sq.Ft/RL
07MHA910W6 MH 090 EPDM WHITE 10X100 w/6"TAPE Plastic Bag 1 575 1000 Sq.Ft/RL
07MH4093BK MH MOD EPDM 045 9' X 305' BLACK Plastic Bag 1 824 2745 Sq.Ft/RL
07MHA616W6 MH 060 EPDM WHITE 16.5X100 w/6"TAPE 0 1650 Sq.Ft/RL
07MHA61W6R MH 060 EPDM WHITE 10X100 w/6"TAPE 0 1000 Sq. Ft/RL
07MHA620W6 MH 060 EPDM WHITE 20X100 w/6"TAPE 0 2000 Sq./Ft
07MHA910W3 MH 090 EPDM WHITE 10X100 w/3"TAPE 0 1000 Sq. Ft/RL

Videos