Skip to content
Standard EPDM

Standard EPDM

Can be used as an elastomeric single-ply roofing membrane for new construction and re-roofing applications. May be installed in Ballasted and Fully Adhered roofing systems.

Colors

System

EPDM
  • Non-reinforced
  • Multiple widths and lengths
  • 45, 60, 90 mil thickness
  • Fully adhered and ballasted systems only
  • Fire-rated
  • Increased Fire-rated sheet available
  • Most often installed as fully adhered
  • Up to a 30 year system warranty available
  • Approved for use with Mule-Hide Acrylic Water Base Bonding Adhesive for up to a 20 year system warranty
  • Dusted or clean sheets available
  • Pre-Taped with 3" or 6" tape available
  • Meets  UL Standards
  • Meets  C-UL Standards
  • Meets  FM Standards
  • Meets  CCMC Standards
  • Meets  Florida-Building Standards
  • Meets  ICC-ES Standards

Documents

PDS EPDM Systems 60 and 90 mil Membrane-Pre-Cleaned
PDS EPDM Systems Standard Black Membrane
PDS Polyepichlorohydrin ECO.CO
SDS - Statement for Article Products

CCMC - Canadian Construction Materials Centre evaluation for EPDM Systems
Florida Product Approval - EPDM Systems
Florida Product Approval HVHZ - EPDM Systems
ICC-ESR Report - Adhered and Mech. Attached EPDM Systems, TPO Systems & PVC Systems
ICC-ESR Report - Ballasted EPDM Systems and TPO Systems
UL - Impact resistance ratings for EPDM Systems
UL - Overview of UL Listings for EPDM Systems
UL - Summary of UL Listings for EPDM Systems

All EPDM Installation Videos
EPDM Cross Reference Chart
EPDM Pocket Guide
EPDM Pocket Guide (Spanish)
EPDM Systems Contractor Brochure
EPDM Systems Residential Installation Handbook
Hail Coverage - Procedures and Requirements
Letter of Compliance Application- Photovoltaic Installation on Mule-Hide Warranted Roof
Modular Roofing Systems Brochure
Mule-Hide Products Company Brochure
Reduced Fastener Requirements for Uplift Ratings
Single-Ply Roofing Accessories Guide
Talking Points - 20-Year EPDM Warranty
Talking Points - EPDM X-23
Tech Bulletin - Pactiv GreenGuard Insulation

Design Enhancements - Single-Ply Membranes
Design Summary - EPDM Systems 10 or 15 year Ballasted
Design Summary - EPDM Systems 10 or 15 year Fully Adhered
Design Summary - EPDM Systems 10 or 15 year Mechanically Attached
E-Z Residential (Single-Family) Warranty Application - Material Only
Warranty - Contractor Eligibility Procedure
Warranty - Notice of Completion
Warranty Program Information - EPDM Systems

Details

6 inch RMS ATTACHMENT STRIP
6 inch RMS WITH TAPE
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/6 inch IN-SEAM TAPE
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/ADHESIVE
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/COVER TAPE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/3 inch IN-SEAM TAPE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/6 inch IN-SEAM TAPE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/ADHESIVE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/COVER TAPE
PARAPET/CURB FLASHING BAR HORIZONTAL ATTACHMENT W/3 inch IN-SEAM TAPE
PARAPET/CURB FLASHING RMS W/TAPE - HORIZONTAL
PARAPET/CURB FLASHING RMS W/TAPE - HORIZONTAL
PARAPET/CURB FLASHING RMS W/TAPE - VERTICAL

2-PIECE INSIDE CORNER WALL FLASHING FOR EPDM
EPDM OUTSIDE CORNER - ONE PIECE WRAP
EPDM OUTSIDE CORNER - TWO PIECE
INSIDE CORNER WITH CONTINUOUS EPDM WALL FLASHING - 90 MIL EPDM
INSIDE CORNER WITH SEPARATE EPDM WALL FLASHING - 90 MIL EPDM
OUTSIDE CORNER WITH UNCURED FLASHING TAPE - 90 MIL EPDM

CURB FLASHING - 90 MIL EPDM
MULTIPLE PENETRATIONS CURB DETAIL - 90 MIL EPDM
PARAPET/CURB FLASHING FOR EPDM
PARAPET/CURB WITH SEPARATE EPDM MEMBRANE - 90 MIL EPDM
SLEEPER FOR EPDM
WELDED CURB FLASHING
WELDED CURB FLASHING - ALL PURPOSE BAR TERMINATION FOR EPDM
WELDED CURB FLASHING - AP BAR TERMINATION
WELDED CURB FLASHING - HIGH CURB FOR EPDM
WELDED CURB FLASHING FOR EPDM
WELDED CURB OVER FIELD MEMBRANE WITH CURED OR UNCURED FLASHING TAPE
WELDED CURB OVER FIELD MEMBRANE WITH SEAM TAPE
WELDED CURB OVER FIELD MEMBRANE WITH SEAM TAPE FOR EPDM
WOOD CURB OVER FIELD MEMBARNE WITH SEAM TAPE
WOOD CURB WITH ALL PURPOSE BAR AND SEAM TAPE
WOOD CURB WITH ALL PURPOSE BAR AND SEAM TAPE FOR EPDM

DRAIN INSERT FOR EPDM
DUTCH GUTTER FOR EPDM AND TPO
INTERMITTENT WALL SCUPPER FOR EPDM
PREMANUFACTURED CONDUCTOR HEAD
ROOF DRAIN FOR EPDM
ROOF DRAIN FOR EPDM AND TPO
ROOF DRAIN WITH SUMP FOR EPDM
ROOF DRAIN WITH TAPERED INSULATION FOR EPDM

12 inch SELF-BRIDGING MATE-LINE
9 inch SELF-BRIDGING MATE-LINE
DECK TO WALL JOINT - A - RMS STRIP - ADHESIVE
EXPANSION JOINT - DECK TO WALL JOINT
EXPANSION JOINT - DECK TO WALL JOINT - A FOR EPDM
EXPANSION JOINT - DECK TO WALL JOINT - C - ADHESIVE FOR EPDM
EXPANSION JOINT - DECK TO WALL JOINT - C - IN-SEAM TAPE FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT - A FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT - B FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT "A"
EXPANSION JOINT - EXISTING FIELD JOINT "B"
EXPANSION JOINT - FIELD JOINT
EXPANSION JOINT - FIELD JOINT - RMS
EXPANSION JOINT - FIELD JOINT - RMS FOR EPDM
EXPANSION JOINT - FIELD JOINT FOR EPDM
EXPANSION JOINT CURB/FIREWALL - ADHESIVE
EXPANSION JOINT CURB/FIREWALL - IN-SEAM TAPE
MATE-LINE WITH COVER TAPE
MATE-LINE WITH COVER TAPE - WOOD BRIDGING MATERIAL
RAISED MATE-LINE
RAISED MATE-LINE

4" TRAY PROFILE
CORNER FOLD DETAIL FOR EPDM
TRANSITION TO WALKWAY
WALKWAY PAVER FOR EPDM AND TPO

2 inch OR THICKER INSULATION ATTACHMENT - 8 FASTENERS PER 4ft X 8ft BOARD
FM - 10 Field Fasteners per 4'x8' Board
FM - 12 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 16 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 17 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 6 Field Fasteners per 4'x8' Board
FM - 8 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 8 Field Fasteners per 4'x8' Board
HELIX MAX FOAM ADHESIVE 12" RIBBON PATTERN
HELIX MAX FOAM ADHESIVE 4" RIBBON PATTERN
HELIX MAX FOAM ADHESIVE 6" RIBBON PATTERN
INSULATION ATTACHMENT - 12 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT - 16 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT - 17 FASTENERS PER 4ft X 8ft IN FIELD

ROOF CORNER AND PERIMETER DETAIL

FIELD FABRICATED HOT PIPE - ADHESIVE FOR EPDM
FIELD FABRICATED HOT STACK - 90 MIL EPDM
FIELD FABRICATED PIPE FLASHING - ADHESIVE
FIELD FABRICATED PIPE SEAL - 90 MIL EPDM
FIELD FABRICATED PITCH PAN - ADHESIVE
FLEXIBLE PENETRATION - 90 MIL EPDM
LIGHTNING ROD - HORIZONTAL ATTACHMENT FOR EPDM
LIGHTNING ROD - VERTICAL ATTACHMENT FOR EPDM
MOLDED PIPE FLASHING WITH TAPE - 90 MIL EPDM
POURABLE SEALER POCKET DOUBLE APPLICATION - 90 MIL EPDM
POURABLE SEALER POCKET FOR EPDM
POURABLE SEALER POCKET WITH RAIN HOOD - 90 MIL EPDM
PRE-FABRICATED METAL PITCH PAN FOR EPDM
PREMOLDED EPDM PIPE BOOT WITH TAPE

ALL PURPOSE BAR TERMINATION - 90 MIL EPDM
ALL PURPOSE BAR TERMINATION for EPDM
ALL PURPOSE BAR TERMINATION WITH FASCIA BOARD
ALL PURPOSE BAR TERMINATION Z-CLIP CAP
ALL PURPOSE BAR TERMINATION Z-CLIP CAP W/VINYL SIDING
BALLASTED RETAINER BAR FOR EPDM
Batten Bar with Cover Strip
DRIP APRON / GUTTER TERMINATION EPDM
DRIP EDGE - 90 MIL EPDM
DRIP EDGE AT MANSARD FOR EPDM
EDGE TERMINATION - ALL-PURPOSE BAR FOR EPDM
EDGE TERMINATION BAR WITH COVER FOR EPDM
EDGE TERMINATION BAR WITH COVER FOR EPDM - OPTION 2
EDGE TERMINATION J-CHANNEL FOR EPDM
EDGE TERMINATION J-CHANNEL FOR EPDM - OPTION 2
GRAVEL STOP TERMINATION FOR EPDM
GRAVEL STOP WITH SCUPPER FOR EPDM
GRAVEL STOP WITH SNAP LOCK FASCIA FOR EPDM
GUTTER WITH METAL FASCIA AND ALL PURPOSE BAR FOR EPDM
J-CHANNEL TERMINATION WITH FASCIA BOARD FOR EPDM - OPTION 1
J-CHANNEL TERMINATION WITH FASCIA BOARD FOR EPDM - OPTION 2
METAL ERA ANCHOR-TITE EDGE DETAIL - 90 MIL EPDM
PERIMETER EDGE WITH FASCIA BOARD FOR EPDM
PREMANUFACTURED 2-PIECE COMPRESSION LARGE EDGE DETAIL FOR EPDM - OPTION 2
PREMANUFACTURED ARCHED DRIP EDGE W/SPLICE CLEAT FOR EPDM

END LAP AND T-JOINT DETAIL FOR EPDM
MEMBRANE SPLICE W/3 inch IN-SEAM TAPE
MEMBRANE SPLICE W/6 inch IN-SEAM TAPE
MEMBRANE SPLICE W/SPLICE ADHESIVE - 6 inch SEAM
MEMBRANE SPLICE WITH IN-SEAM TAPE - 3 inch SEAM
MEMBRANE SPLICE WITH IN-SEAM TAPE - 90 MIL
MEMBRANE SPLICE WITH SPLICE ADHESIVE - 3 inch SEAM
VERTICAL TERMINATION - 90 MIL EPDM
WALL FLASHING WITH CONTINUOUS MEMBRANE - 90 MIL EPDM

MODULAR EPDM Mate-Line- Cover Tape
PREMANUFACTURED ARCHED COPING WITH SPLICE PLATE
PREMANUFACTURED METAL EDGE EXTENDER
PREMANUFACTURED REGLET COUNTERFLASHING
PREMANUFACTURED SURFACE MOUNTED COUNTERFLASHING
VERTICAL TERMINATION COUNTERFLASHING FOR EPDM
VERTICAL TERMINATION COUNTERFLASHING W/A-P BAR FOR EPDM
VERTICAL TERMINATION METAL COPING FOR EPDM
VERTICAL TERMINATION REGLET FOR EPDM
VERTICAL TERMINATION STONE COPING FOR EPDM
VERTICAL TERMINATION WITH A-P BAR FOR EPDM

EPDM BASE TIE-IN TO SHINGLE ROOF ALL PURPOSE BAR ATTACHMENT FOR EPDM
EPDM BASE TIE-IN TO SHINGLE ROOF W/RMS ATTACHMENT FOR EPDM
EPDM BASE TIE-IN TO SHINGLE ROOF W/RMS ATTACHMENT FOR EPDM - OPTION 2
EPDM TIE-IN HOT STRIPPING
EPDM TIE-IN TO BUILT-UP ROOF - ADHESIVE
EPDM TIE-IN TO BUILT-UP ROOF - IN-SEAM TAPE
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - ADHESIVE
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - IN-SEAM TAPE
SEGREGATION DETAIL/GREEN ROOF AND EXISTING ROOF
SEGREGATION DETAIL/GREEN ROOF AND EXPOSED SINGLE PLY

RIDGE ATTACHMENT WITH RMS FOR EPDM

Specifications

Summary Specification - EPDM Ballasted

Specification - EPDM Systems Fully Adhered
Specification Supplement - AeroWeb Adhesive
Summary Specification - EPDM Systems Fully Adhered

Guide - EPDM Systems and Acrylic water base bonding adhesive
Guide - EPDM Systems and Solvent Base Bonding Adhesive
Guide - EPDM Systems Design Guidelines
Guide - EPDM Systems Flashing and Adhesive Guidelines
Guide - Insulation Guidelines
Guide - Roof Mounted Photovoltaic Installations
Single-Ply Insulation Attachment Guidelines
Tech Note - Design Wind Speed vs Warranted Wind Speed
Tech Note - Sheet Flutter on Mechanically Attached Systems

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
07MH407X0B MH EPDM 045 7'X150' BLACK Plastic Bag 1 314 1050 Sq.Ft/RL
07MH407X1B MH EPDM 045 7'X100' BLACK Plastic Bag 1 225 700 Sq.Ft/RL
07MH407X5B MH EPDM 045 7'X50' BLACK Plastic Bag 1 118 350 Sq.Ft/RL
07MH410X0B MH EPDM 045 10'X150' BLACK Plastic Bag 1 484 1500 Sq.Ft/RL
07MH410X1B MH EPDM 045 10'X100' BLACK Plastic Bag 1 316 1000 Sq.Ft/RL
07MH410X1C MH EPDM 045 10'X100' BLACK LOW TALC Plastic Bag 1 316 1000 Sq.Ft/RL
07MH410X2B MH EPDM 045 10'X200' BLACK Plastic Bag 1 640 2000 Sq.Ft/RL
07MH410X5B MH EPDM 045 10'X50' BLACK Plastic Bag 1 175 500 Sq.Ft/RL
07MH410X5C MH EPDM 045 10'X50' BLACK LOW TALC Plastic Bag 1 175 500 Sq.Ft/RL
07MH412X1C MH EPDM 045 12'X100' BLACK LOW TALC Plastic Bag 1 341 1200 Sq.Ft/RL
07MH415X0B MH EPDM 045 15'X150' BLACK Plastic Bag 1 840 2250 Sq.Ft/RL
07MH415X1B MH EPDM 045 15'X100' BLACK Plastic Bag 1 506 1500 Sq.Ft/RL
07MH415X1C MH EPDM 045 15'X100' BLACK LOW TALC Plastic Bag 1 477 1500 Sq.Ft/RL
07MH415X2B MH EPDM 045 15'X200' BLACK Plastic Bag 1 870 3000 Sq.Ft/RL
07MH415X5B MH EPDM 045 15'X50' BLACK Plastic Bag 1 280 750 Sq.Ft/RL
07MH416X1B MH EPDM 045 16.5' X 100' BLACK Plastic Bag 1 540 1650 Sq.Ft/RL
07MH420X0B MH EPDM 045 20'X150' BLACK Plastic Bag 1 1068 3000 Sq.Ft/RL
07MH420X1B MH EPDM 045 20'X100' BLACK Plastic Bag 1 636 2000 Sq.Ft/RL
07MH420X1C MH EPDM 045 20'X100' BLACK LOW TALC Plastic Bag 1 636 2000 Sq.Ft/RL
07MH420X2B MH EPDM 045 20'X200' BLACK Plastic Bag 1 1252 4000 Sq.Ft/RL
07MH420X5B MH EPDM 045 20'X50' BLACK Plastic Bag 1 342 1000 Sq.Ft/RL
07MH420X5C MH EPDM 045 20'X50' BLACK LOW TALC Plastic Bag 1 342 1000 Sq.Ft/RL
07MH422X1B MH EPDM 045 22'X100' BLACK Plastic Bag 1 810 2500 Sq.Ft/RL
07MH425X0B MH EPDM 045 25'X150' BLACK Plastic Bag 1 1125 3000 Sq.Ft/RL
07MH425X1B MH EPDM 045 25'X100' BLACK Plastic Bag 1 810 2500 Sq.Ft/RL
07MH425X1C MH EPDM 045 25'X100' BLACK LOW TALC Plastic Bag 1 100 2500 Sq.Ft/RL
07MH425X2B MH EPDM 045 25'X200' BLACK Plastic Bag 1 1125 5000 Sq.Ft/RL
07MH430X0B MH EPDM 045 30'X150' BLACK Plastic Bag 1 1350 4500 Sq.Ft/RL
07MH430X1B MH EPDM 045 30'X100' BLACK Plastic Bag 1 900 3000 Sq.Ft/RL
07MH430X1C MH EPDM 045 30'X100' BLACK LOW TALC Plastic Bag 1 954 3000 Sq.Ft/RL
07MH430X2B MH EPDM 045 30'X200' BLACK Plastic Bag 1 1842 6000 Sq.Ft/RL
07MH430X5B MH EPDM 045 30'X50' BLACK Plastic Bag 1 480 1500 Sq.Ft/RL
07MH435X1B MH EPDM 045 35'X100' BLACK Plastic Bag 1 900 3500 Sq.Ft/RL
07MH440X0B MH EPDM 045 40'X150' BLACK Plastic Bag 1 1800 6000 Sq.Ft/RL
07MH440X1B MH EPDM 045 40'X100' BLACK Plastic Bag 1 1200 4000 Sq.Ft/RL
07MH440X2B MH EPDM 045 40'X200' BLACK Plastic Bag 1 2400 8000 Sq.Ft/RL
07MH440X5B MH EPDM 045 40'X50' BLACK Plastic Bag 1 610 2000 Sq.Ft/RL
07MH445X0B MH EPDM 045 45'X150' BLACK Plastic Bag 1 675 6750 Sq.Ft/RL
07MH445X1B MH EPDM 045 45'X100' BLACK Plastic Bag 1 1425 4500 Sq.Ft/RL
07MH445X5B MH EPDM 045 45'X50' BLACK Plastic Bag 1 675 2250 Sq.Ft/RL
07MH450X0B MH EPDM 045 50'X150' BLACK Plastic Bag 1 2333 7500 Sq.Ft/RL
07MH450X1B MH EPDM 045 50'X100' BLACK Plastic Bag 1 1525 5000 Sq.Ft/RL
07MH450X2B MH EPDM 045 50'X200' BLACK Plastic Bag 1 3100 10000 Sq.Ft/RL
07MH450X5B MH EPDM 045 50'X50' BLACK Plastic Bag 1 725 2500 Sq.Ft/RL
07MH607X0B MH EPDM 060 7'X150' BLACK Plastic Bag 1 438 1050 Sq.Ft/RL
07MH607X1B MH EPDM 060 7'X100' BLACK Plastic Bag 1 312 700 Sq.Ft/RL
07MH607X5B MH EPDM 060 7'X50' BLACK Plastic Bag 1 161 350 Sq.Ft/RL
07MH610X0B MH EPDM 060 10'X150' BLACK Plastic Bag 1 599 1500 Sq.Ft/RL
07MH610X1B MH EPDM 060 10'X100' BLACK CLEAN Plastic Bag 1 400 1000 Sq.Ft/RL
07MH610X1C MH EPDM 060 10'X100' BLACK LOW TALC Plastic Bag 1 416 1000 Sq.Ft/RL
07MH610X1D MH EPDM 060 10'X100' BLACK DUSTED Plastic Bag 1 400 1000 Sq.Ft/RL
07MH610X5B MH EPDM 060 10'X50' BLACK CLEAN Plastic Bag 1 208 500 Sq.Ft/RL
07MH610X5C MH EPDM 060 10'X50' BLACK LOW TALC Plastic Bag 1 208 500 Sq.Ft/RL
07MH610X5D MH EPDM 060 10'X50' BLACK DUSTED Plastic Bag 1 211 500 Sq.Ft/RL
07MH612X1B MH EPDM 060 12'X100' BLACK Plastic Bag 1 541 1200 Sq.Ft/RL
07MH612X5B MH EPDM 060 12'X50' BLACK Plastic Bag 1 271 600 Sq.Ft/RL
07MH615X0B MH EPDM 060 15'X150' BLACK Plastic Bag 1 1025 2250 Sq.Ft/RL
07MH615X1B MH EPDM 060 15'X100' BLACK Plastic Bag 1 629 1500 Sq.Ft/RL
07MH615X5B MH EPDM 060 15'X50' BLACK Plastic Bag 1 374 750 Sq.Ft/RL
07MH615X5B MH EPDM 060 15'X50' BLACK Plastic Bag 1 374 750 Sq.Ft/RL
07MH61651B MH EPDM 060 16.5 X 100' BLACK Plastic Bag 1 705 1650 Sq.Ft/RL
07MH620X0B MH EPDM 060 20'X150' BLACK Plastic Bag 1 1248 3000 Sq.Ft/RL
07MH620X1B MH EPDM 060 20'X100' BLACK Plastic Bag 1 744 2000 Sq.Ft/RL
07MH620X1C MH EPDM 060 20'X100' BLACK LOW TALC Plastic Bag 1 856 2000 Sq.Ft/RL
07MH620X2B MH EPDM 060 20'X200' BLACK Plastic Bag 1 1664 4000 Sq.Ft/RL
07MH620X5B MH EPDM 060 20'X50' BLACK Plastic Bag 1 441 1000 Sq.Ft/RL
07MH620X5C MH EPDM 060 20'X50' BLACK LOW TALC Plastic Bag 1 441 1000 Sq.Ft/RL
07MH625X1B MH EPDM 060 25'X100' BLACK Plastic Bag 1 1023 2500 Sq.Ft/RL
07MH625X2B MH EPDM 060 25'X200' BLACK Plastic Bag 1 2080 5000 Sq.Ft/RL
07MH625X5B MH EPDM 060 25'X50' BLACK Plastic Bag 1 520 1250 Sq.Ft/RL
07MH630X0B MH EPDM 060 30'X150' BLACK Plastic Bag 1 1832 4500 Sq.Ft/RL
07MH630X1B MH EPDM 060 30'X100' BLACK Plastic Bag 1 1185 3000 Sq.Ft/RL
07MH630X1S MH EPDM 060 30'X100' BLACK (SINGLE FOLD) Plastic Bag 1 1230 3000 Sq.Ft/RL
07MH630X2B MH EPDM 060 30'X200' BLACK Plastic Bag 1 2496 6000 Sq.Ft/RL
07MH630X5B MH EPDM 060 30'X50' BLACK Plastic Bag 1 677 1500 Sq.Ft/RL
07MH640X0B MH EPDM 060 40'X150' BLACK Plastic Bag 1 2442 6000 Sq.Ft/RL
07MH640X1B MH EPDM 060 40'X100' BLACK Plastic Bag 1 1560 4000 Sq.Ft/RL
07MH640X5B MH EPDM 060 40'X50' BLACK Plastic Bag 1 814 2000 Sq.Ft/RL
07MH650X0B MH EPDM 060 50'X150' BLACK Plastic Bag 1 3053 7500 Sq.Ft/RL
07MH650X1B MH EPDM 060 50'X100' BLACK Plastic Bag 1 2000 5000 Sq.Ft/RL
07MH650X1B MH EPDM 060 50'X100' BLACK Plastic Bag 1 2000 5000 Sq.Ft/RL
07MH907X5B MH EPDM 090 7' X 50' BLACK Plastic Bag 1 216 500 Sq.Ft/RL
07MH910X1B MH EPDM 090 10'X100' BLACK Plastic Bag 1 592 1000 Sq.Ft/RL
07MH910X5B MH EPDM 090 10' X 50' BLACK Plastic Bag 1 312 500 Sq.Ft/RL
07MHA41013 MH 045 EPDM CLEAN 10X100 BLK 3"TAPE 2 PK Plastic Bag 2 646 2000 Sq.Ft/RL
07MHA41613 MH 045 EPDM CLEAN 16.5X100 BLK 3"TAPE Plastic Bag 1 626 1650 Sq.Ft/RL
07MHA42013 MH 045 EPDM 20X100 BLK 3"TAPE Plastic Bag 1 678 2000 Sq.Ft/RL
07MHA43013 MH 045 EPDM 30X100 BLK 3"TAPE Plastic Bag 1 1017 3000 Sq.Ft/RL
07MHA61013 MH 060 EPDM CLEAN 10X100 BLK 3"TAPE 2 PK Plastic Bag 2 784 2000 Sq.Ft/RL
07MHA61016 MH 060 EPDM CLEAN 10X100 BLK 6"TAPE 2 PK Plastic Bag 2 796 2000 Sq.Ft/RL
07MHA6113R MH 060 EPDM CLEAN BLACK 10X100 w/3"TAPE Plastic Bag 1 416 1000 Sq.Ft/RL
07MHA6116R MH 060 EPDM CLEAN BLACK 10X100 w/6"TAPE Plastic Bag 1 416 1000 Sq.Ft/RL
07MHA6153R MH 060 EPDM CLEAN BLACK 10X50 w/3"TAPE Plastic Bag 1 230 500 Sq.Ft/RL
07MHA61613 MH 060 EPDM CLEAN BLACK 16.5X100 w/3"TAPE Plastic Bag 1 718 1650 Sq.Ft/RL
07MHA61616 MH 060 EPDM CLEAN BLACK 16.5X100 w/6"TAPE Plastic Bag 1 705 1650 Sq.Ft/RL
07MHA62013 MH 060 EPDM BLACK 20X100 w/3"TAPE Plastic Bag 1 834 2000 Sq.Ft/RL
07MHA62016 MH 060 EPDM BLACK 20X100 w/6"TAPE Plastic Bag 1 866 2000 Sq.Ft/RL
07MHA63013 MH 060 EPDM BLACK 30X100 w/3"TAPE Plastic Bag 1 1230 3000 Sq.Ft/RL
07MHA63013 MH 060 EPDM BLACK 30X100 w/3"TAPE Plastic Bag 1 1230 3000 Sq.Ft/RL
07MHA63016 MH 060 EPDM BLACK 30X100 w/6"TAPE Plastic Bag 1 1230 3000 Sq.Ft/RL
07MHA91016 MH 090 EPDM 10X100 BLK 6"TAPE 2 PK Plastic Bag 2 1266 2000 Sq.Ft/RL
07MHA91053 MH 090 EPDM CLEAN 10X50 BLK 3"TAPE 2 PK Plastic Bag 2 598 1000 Sq.Ft/RL
07MHA91056 MH 090 EPDM CLEAN 10X50 BLK 6"TAPE 2 PK Plastic Bag 2 633 1000 Sq.Ft/RL
07MHA9116R MH 090 EPDM CLEAN BLACK 10X100 w/6"TAPE Plastic Bag 1 575 1000 Sq.Ft/RL
07MHE6105B MH ECH 060 10 X 50 BLACK Plastic Bag 1 264 500 Sq.Ft/RL
07MH425X5B MH EPDM 045 25'X50' BLACK 0
07MH608X5B MH EPDM 060 8'X50' BLACK 0
07MH61025B MH EPDM 060 10'X25' BLACK CLEAN 12/PAL 0
07MH410X1N MH EPDM 045 10'X100' CLEAN SHEET BLACK 0 1000 Sq. Ft/RL
07MH410X5N MH EPDM 045 10'X50' CLEAN SHEET BLACK 0 500 Sq. Ft/Roll
07MHA62513 MH 060 EPDM BLACK 25X100 w/3"TAPE 0 1007 Sq. Ft/RL
07MHA62516 MH 060 EPDM BLACK 25X100 w/6"TAPE 0 1007 Sq. Ft/RL
07MHA9113R MH 090 EPDM CLEAN BLACK 10X100 w/3"TAPE 0 1000 Sq. Ft/RL
07MHA9156R MH 090 EPDM CLEAN BLACK 10X50 w/6"TAPE 0 500 Sq. Ft/Roll

FAQs

Plywood, OSB, HD Wood Fiberboard, DensDeck® Prime or SECUROCK®

Fees vary depending on the type of warranty desired. Current Fees are listed on Mule-Hide Warranty Application forms.

Specific warranties may require submission of material invoices.

No, this is not required, but all areas of wet insulation must be replaced with new, dry, similar material, specific warranties may require an independent moisture scan of the roof.

Yes, Mule-Hide Territory Managers offer these services.

Mule-Hide Bonding Adhesive (solvent based), Aquabase 120 (water based) or Low VOC Bonding Adhesive are used as a contact adhesive to adhere flashings to acceptable vertical surfaces.

Drill Point Fasteners (#12) should be used with 3" Insulation Plates.

In-Seam Tape is a cured, butyl based, two-sided adhesive tape that bonds on contact and is used to seam and eliminate applicator inconsistencies & voids. When applied properly (Mule-Hide Tape Primer must be used), it provides the fastest way to achieve strong, long lasting, watertight field seams.

Cured Cover Tape is a length of EPDM, factory-bonded to a cured butyl adhesive tape that is highly resistant to the most extreme weather & use situations. It is used to strip in gravel stops and drip aprons metal edging). When applied properly (Mule-Hide Tape Primer must be used), it provides a long lasting, high-performing seal. Cured Cover Tape is also used to strip in field seams, rows of seam plates or batten bars for membrane attachment.

Just provide Mule-Hide with the following information: A copy of the specification Name & address to whom the letter should be addressed Your phone & fax number What is the UL/FM requirement? Deck type? Slope? Insulation type and thickness? Membrane and system? Building location and height? Overall dimensions? Parapet height?

Walk pads are always recommended. Mule-Hide offers walk pads for each system/membrane type we sell.